Skip to content
    OBD Tuning
    Send to us
    Send to us
    Home
    Fault Codes
    VOLVO
    ECM-2501
    VOLVO

    ECM-2501 - Fuel pressure. Pressure too high

    System

    Engine Control Module (ECM)

    Volvo models this fault code applies to

    Applies to the following models:

    5 models

    S60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)

    Show models by year and engine (10)
    • Volvo S60 (2001–2009)2001Engine D5244T only
    • Volvo S60 (2001–2009)2002–2003, 2006Engine D5244T, D5244T2 only
    • Volvo S60 (2001–2009)2004–2005Engine D5244T, D5244T2, D5244T3 only
    • Volvo S80 (1999–2006)2001Engine D5244T only
    • Volvo S80 (1999–2006)2002–2006Engine D5244T, D5244T2 only
    • Volvo V70 (2000–2008)2001Engine D5244T only
    • Volvo V70 (2000–2008)2002–2003, 2006Engine D5244T, D5244T2 only
    • Volvo V70 (2000–2008)2004–2005Engine D5244T, D5244T2, D5244T3 only
    • Volvo V70 XC / XC70 (2001–2007)2003–2006Engine D5244T only
    • Volvo XC90 (2003–)2003–2006Engine D5244T only

    What does this fault code mean?

    The ECM reads fuel pressure in the rail. If the pressure is too high, the code is set. Causes can be air in the fuel, a blocked return line, or a damaged sensor or valve.

    Possible causes

    • The car has run with an empty tank
    • Air in the fuel
    • Blockage in the fuel return line
    • Damaged fuel pressure sensor
    • Damaged fuel pressure control valve

    What you can do

    1. 1Read and note the code, clear it and road test to see whether it returns
    2. 2Think about whether the car has recently been run on a low fuel level, since air can then enter the fuel system
    3. 3Look for fuel leaks in the fuel lines between the tank and the engine, since air in the fuel can come from there
    4. 4Check the plugs of the pressure sensor and the pressure control valve for contact resistance and oxidation
    5. 5If you have a diagnostic tool: activate the fuel pressure control valve and check that the fuel pressure in live data rises
    6. 6Have a workshop check the return line and the sensors, and replace any faulty parts

    Symptoms you may notice2

    • Noise from the engine, especially at idle
    • The engine jerks

    General guidance for car owners. Diagnosis on the car can point to a different cause.

    OBD Tuning

    Sweden's leading expert center for automotive electronics. We offer professional ECU tuning, control unit repair and diagnostics with 12-month warranty.

    Services

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    Database & Diagnostics

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    ECU Manufacturers

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Company

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    Visit us

    Gjuterigatan 29, Karlstad

    Call us

    054-830 480

    Email us

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. All rights reserved.