VOLVO
ECM-2550 - Fuel system. Too low pressure
System
Engine Control Module (ECM)
Volvo models this fault code applies to
This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.
Applies to the following models:
8 modelsC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Show models by year and engine (20)
- Volvo C30 (2007–2013)2007Engine D5244T8, D5244T9 only
- Volvo C30 (2007–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo C70 (2006–2013)2007Engine D5244T8, D5244T9 only
- Volvo C70 (2006–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo S40 (2004–2013)2006Engine D5244T8 only
- Volvo S40 (2004–2013)2007Engine D5244T8, D5244T9 only
- Volvo S40 (2004–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo S60 (2001–2009)2006Engine D5244T4, D5244T5, D5244T6, D5244T7 only
- Volvo S60 (2001–2009)2007–2009Engine D5244T4, D5244T5, D5244T7 only
- Volvo V50 (2004–2013)2006Engine D5244T8 only
- Volvo V50 (2004–2013)2007Engine D5244T8, D5244T9 only
- Volvo V50 (2004–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo V70 (2000–2008)2006Engine D5244T4, D5244T5, D5244T6, D5244T7 only
- Volvo V70 (2000–2008)2007Engine D5244T4, D5244T5, D5244T7 only
- Volvo V70 (2000–2008)2008Engine D5244T5, D5244T7 only
- Volvo V70 XC / XC70 (2001–2007)2006–2007Engine D5244T4 only
- Volvo XC90 (2003–)2006–2007Engine D5244T4 only
- Volvo XC90 (2003–)2008–2010Engine D5244T4, D5244T5 only
- Volvo XC90 (2003–)2011Engine D5244T18, D5244T4, D5244T5 only
- Volvo XC90 (2003–)2012All engines except: B5254T2, B6324S5
What does this fault code mean?
At certain operating modes, with a warm engine, the engine control module (ECM) regulates fuel pressure using the fuel flow control valve. If the ECM detects that the fuel pressure is too low in such a mode, the code is set. The fault may be caused by a leak, air in the fuel lines, a clogged fuel filter or a damaged component in the fuel system.
Possible causes
- Leakage in the fuel system
- Air in the fuel lines
- Clogged fuel filter
- Damaged tank pump
- Damaged fuel pressure sensor
- Damaged fuel flow control valve
What you can do
- 1Read and act on any fault codes for the tank pump first, then clear the code and road test the car
- 2Look for fuel leaks at the connections and the injectors, and check that the fuel filter is not clogged
- 3Check that the fuel lines are not kinked and that the fuel pressure sensor connector is secure and free from oxidation
- 4With diagnostic equipment, follow the fuel pressure sensor's live data with the engine running and see whether the value drops under load
- 5Have a workshop check the fuel flow control valve and the tank pump if the fault returns after these checks
Symptoms you may notice2
- Message in the display
- The engine stalls
What the fault can affect1
- The engine control module uses a calculated value instead of the measured signal
General guidance for car owners. Diagnosis on the car can point to a different cause.