VOLVO
ECM-2570 - Fuel system. Too low pressure
System
Engine Control Module (ECM)
Volvo models this fault code applies to
This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.
Applies to the following models:
8 modelsC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Show models by year and engine (20)
- Volvo C30 (2007–2013)2007Engine D5244T8, D5244T9 only
- Volvo C30 (2007–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo C70 (2006–2013)2007Engine D5244T8, D5244T9 only
- Volvo C70 (2006–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo S40 (2004–2013)2006Engine D5244T8 only
- Volvo S40 (2004–2013)2007Engine D5244T8, D5244T9 only
- Volvo S40 (2004–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo S60 (2001–2009)2006Engine D5244T4, D5244T5, D5244T6, D5244T7 only
- Volvo S60 (2001–2009)2007–2009Engine D5244T4, D5244T5, D5244T7 only
- Volvo V50 (2004–2013)2006Engine D5244T8 only
- Volvo V50 (2004–2013)2007Engine D5244T8, D5244T9 only
- Volvo V50 (2004–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo V70 (2000–2008)2006Engine D5244T4, D5244T5, D5244T6, D5244T7 only
- Volvo V70 (2000–2008)2007Engine D5244T4, D5244T5, D5244T7 only
- Volvo V70 (2000–2008)2008Engine D5244T5, D5244T7 only
- Volvo V70 XC / XC70 (2001–2007)2006–2007Engine D5244T4 only
- Volvo XC90 (2003–)2006–2007Engine D5244T4 only
- Volvo XC90 (2003–)2008–2010Engine D5244T4, D5244T5 only
- Volvo XC90 (2003–)2011Engine D5244T18, D5244T4, D5244T5 only
- Volvo XC90 (2003–)2012All engines except: B5254T2, B6324S5
What does this fault code mean?
In some operating modes with a warm engine, fuel pressure is controlled by the fuel flow control valve. If the pressure is too low in such a mode and the ECM detects it, the code is set. The fault can have many causes in the fuel system, from leaks and air to a clogged filter or damaged components.
Possible causes
- Leak in the fuel system
- Air in the fuel lines
- Clogged fuel filter
- Faulty tank pump
- Faulty fuel pressure control valve
- Faulty injector
What you can do
- 1Read and act on any fault codes for the tank pump first, then clear the code and road test the car
- 2Look for leaks in the fuel system, such as damp connections or a smell of fuel in the engine bay
- 3Check whether the fuel filter is clogged, and replace it if you are unsure of its condition
- 4Check the connectors at the fuel pressure sensor and the fuel pressure control valve for contact resistance, oxidation and looseness
- 5Use a multimeter to check that the wire to the fuel pressure sensor is not broken
- 6Have a workshop check the injectors and the fuel flow control valve if the fault remains
Symptoms you may notice1
- No noticeable symptoms for the driver
What the fault can affect1
- The ECM selects a calculated value instead of the measured signal
General guidance for car owners. Diagnosis on the car can point to a different cause.