VOLVO
ECM-2590 - Fuel system. Too low pressure
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
8 modelsC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Show models by year and engine (20)
- Volvo C30 (2007–2013)2007Engine D5244T8, D5244T9 only
- Volvo C30 (2007–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo C70 (2006–2013)2007Engine D5244T8, D5244T9 only
- Volvo C70 (2006–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo S40 (2004–2013)2006Engine D5244T8 only
- Volvo S40 (2004–2013)2007Engine D5244T8, D5244T9 only
- Volvo S40 (2004–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo S60 (2001–2009)2006Engine D5244T4, D5244T5, D5244T6, D5244T7 only
- Volvo S60 (2001–2009)2007–2009Engine D5244T4, D5244T5, D5244T7 only
- Volvo V50 (2004–2013)2006Engine D5244T8 only
- Volvo V50 (2004–2013)2007Engine D5244T8, D5244T9 only
- Volvo V50 (2004–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo V70 (2000–2008)2006Engine D5244T4, D5244T5, D5244T6, D5244T7 only
- Volvo V70 (2000–2008)2007Engine D5244T4, D5244T5, D5244T7 only
- Volvo V70 (2000–2008)2008Engine D5244T5, D5244T7 only
- Volvo V70 XC / XC70 (2001–2007)2006–2007Engine D5244T4 only
- Volvo XC90 (2003–)2006–2007Engine D5244T4 only
- Volvo XC90 (2003–)2008–2010Engine D5244T4, D5244T5 only
- Volvo XC90 (2003–)2011Engine D5244T18, D5244T4, D5244T5 only
- Volvo XC90 (2003–)2012All engines except: B5254T2, B6324S5
What does this fault code mean?
In some operating modes, including when the engine is cold, fuel pressure is controlled only by the fuel pressure control valve. If the pressure is too low in such a mode, the code is set. The fault may lie in the fuel system or in the pressure control itself.
Possible causes
- Leakage in the fuel system
- Air in the fuel lines
- Blocked fuel filter
- Damaged fuel pressure sensor
- Damaged fuel pressure control valve
- Damaged tank pump
What you can do
- 1Read and act on any fault codes for the tank pump first, then clear the code and road test the car
- 2Look for leaks in the fuel system, for example at connections and in hoses
- 3Replace the fuel filter if you suspect it is blocked, and check that the lines are not kinked
- 4Check the connector at the fuel pressure sensor for contact resistance and oxidation
- 5Have a workshop check the fuel pressure control valve and the tank pump if the fault remains
Symptoms you may notice1
- Message in the information display
What the fault can affect1
- The engine control module substitutes a calculated pressure value
General guidance for car owners. Diagnosis on the car can point to a different cause.