VOLVO
ECM-25A0 - Fuel system. Too low pressure
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
8 modelsC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Show models by year and engine (20)
- Volvo C30 (2007–2013)2007Engine D5244T8, D5244T9 only
- Volvo C30 (2007–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo C70 (2006–2013)2007Engine D5244T8, D5244T9 only
- Volvo C70 (2006–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo S40 (2004–2013)2006Engine D5244T8 only
- Volvo S40 (2004–2013)2007Engine D5244T8, D5244T9 only
- Volvo S40 (2004–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo S60 (2001–2009)2006Engine D5244T4, D5244T5, D5244T6, D5244T7 only
- Volvo S60 (2001–2009)2007–2009Engine D5244T4, D5244T5, D5244T7 only
- Volvo V50 (2004–2013)2006Engine D5244T8 only
- Volvo V50 (2004–2013)2007Engine D5244T8, D5244T9 only
- Volvo V50 (2004–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo V70 (2000–2008)2006Engine D5244T4, D5244T5, D5244T6, D5244T7 only
- Volvo V70 (2000–2008)2007Engine D5244T4, D5244T5, D5244T7 only
- Volvo V70 (2000–2008)2008Engine D5244T5, D5244T7 only
- Volvo V70 XC / XC70 (2001–2007)2006–2007Engine D5244T4 only
- Volvo XC90 (2003–)2006–2007Engine D5244T4 only
- Volvo XC90 (2003–)2008–2010Engine D5244T4, D5244T5 only
- Volvo XC90 (2003–)2011Engine D5244T18, D5244T4, D5244T5 only
- Volvo XC90 (2003–)2012All engines except: B5254T2, B6324S5
What does this fault code mean?
In certain operating modes, such as when the engine is cold, fuel pressure is controlled only by the fuel pressure control valve. If the pressure is too low in such a mode, the code is set. The fault may lie in the fuel lines, the sensor, one of the valves or the injectors.
Possible causes
- Air in the fuel lines
- Leakage in the fuel system
- Damaged fuel pressure sensor
- Damaged injector
- Damaged fuel pressure control valve
- Damaged fuel flow control valve
What you can do
- 1Read the fault codes for the tank pump and fix them first, then clear this code and road test the car
- 2Look for leaks in the fuel system and check that the fuel filter is not clogged
- 3Think about whether anything has recently been done to the fuel system, since air may have entered the lines
- 4Check the connector at the fuel pressure sensor for contact resistance and oxidation
- 5With diagnostic equipment, compare the fuel pressure sensor's live data when the engine is cold with how it looks once warm
- 6Have a workshop check the injectors and the fuel flow control valve if the fault remains
Symptoms you may notice2
- Message in the information display
- The engine stalls
What the fault can affect1
- A calculated value is used instead of the measured pressure
General guidance for car owners. Diagnosis on the car can point to a different cause.