VOLVO
ECM-25B0 - Fuel system. Pressure too high
System
Engine Control Module (ECM)
Volvo models this fault code applies to
This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.
Applies to the following models:
8 modelsC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Show models by year and engine (20)
- Volvo C30 (2007–2013)2007Engine D5244T8, D5244T9 only
- Volvo C30 (2007–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo C70 (2006–2013)2007Engine D5244T8, D5244T9 only
- Volvo C70 (2006–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo S40 (2004–2013)2006Engine D5244T8 only
- Volvo S40 (2004–2013)2007Engine D5244T8, D5244T9 only
- Volvo S40 (2004–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo S60 (2001–2009)2006Engine D5244T4, D5244T5, D5244T6, D5244T7 only
- Volvo S60 (2001–2009)2007–2009Engine D5244T4, D5244T5, D5244T7 only
- Volvo V50 (2004–2013)2006Engine D5244T8 only
- Volvo V50 (2004–2013)2007Engine D5244T8, D5244T9 only
- Volvo V50 (2004–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo V70 (2000–2008)2006Engine D5244T4, D5244T5, D5244T6, D5244T7 only
- Volvo V70 (2000–2008)2007Engine D5244T4, D5244T5, D5244T7 only
- Volvo V70 (2000–2008)2008Engine D5244T5, D5244T7 only
- Volvo V70 XC / XC70 (2001–2007)2006–2007Engine D5244T4 only
- Volvo XC90 (2003–)2006–2007Engine D5244T4 only
- Volvo XC90 (2003–)2008–2010Engine D5244T4, D5244T5 only
- Volvo XC90 (2003–)2011Engine D5244T18, D5244T4, D5244T5 only
- Volvo XC90 (2003–)2012All engines except: B5254T2, B6324S5
What does this fault code mean?
In certain operating modes, including when the engine is cold, fuel pressure is controlled only by the fuel pressure control valve. If the pressure is too high in such a mode, the code is set. The fault may lie in the sensor or the valve, or the valve may not be receiving its supply voltage.
Possible causes
- Damaged fuel pressure sensor
- The fuel pressure control valve has no supply voltage
- Damaged fuel pressure control valve
What you can do
- 1Read the code, clear it and road test the car to see whether it returns
- 2Check the connectors at the fuel pressure sensor and the fuel pressure control valve for looseness, oxidation and contact resistance
- 3Use a multimeter to check that the wire to the fuel pressure control valve is not open circuit
- 4Think about whether anything has recently been done to the fuel system or its connectors, and check that everything is seated correctly
- 5With diagnostic equipment, read the fuel pressure sensor's live data when the engine is cold and again once it is warm
- 6Have a workshop check the supply voltage to the fuel pressure control valve if the fault remains
Symptoms you may notice2
- Message in the information display
- Reduced performance
What the fault can affect1
- The engine control module uses a calculated fuel pressure value instead of the sensor's reading
General guidance for car owners. Diagnosis on the car can point to a different cause.