VOLVO
ECM-25C0 - Fuel system. Too low pressure
System
Engine Control Module (ECM)
Volvo models this fault code applies to
This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.
Applies to the following models:
8 modelsC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Show models by year and engine (20)
- Volvo C30 (2007–2013)2007Engine D5244T8, D5244T9 only
- Volvo C30 (2007–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo C70 (2006–2013)2007Engine D5244T8, D5244T9 only
- Volvo C70 (2006–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo S40 (2004–2013)2006Engine D5244T8 only
- Volvo S40 (2004–2013)2007Engine D5244T8, D5244T9 only
- Volvo S40 (2004–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo S60 (2001–2009)2006Engine D5244T4, D5244T5, D5244T6, D5244T7 only
- Volvo S60 (2001–2009)2007–2009Engine D5244T4, D5244T5, D5244T7 only
- Volvo V50 (2004–2013)2006Engine D5244T8 only
- Volvo V50 (2004–2013)2007Engine D5244T8, D5244T9 only
- Volvo V50 (2004–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo V70 (2000–2008)2006Engine D5244T4, D5244T5, D5244T6, D5244T7 only
- Volvo V70 (2000–2008)2007Engine D5244T4, D5244T5, D5244T7 only
- Volvo V70 (2000–2008)2008Engine D5244T5, D5244T7 only
- Volvo V70 XC / XC70 (2001–2007)2006–2007Engine D5244T4 only
- Volvo XC90 (2003–)2006–2007Engine D5244T4 only
- Volvo XC90 (2003–)2008–2010Engine D5244T4, D5244T5 only
- Volvo XC90 (2003–)2011Engine D5244T18, D5244T4, D5244T5 only
- Volvo XC90 (2003–)2012All engines except: B5254T2, B6324S5
What does this fault code mean?
In some operating modes, for example with a cold engine, fuel pressure is controlled only by the fuel pressure control valve. The ECM flags a pressure that is too low in such a mode, and the code is set.
Possible causes
- Faulty tank pump
- Leakage in the fuel system
- Clogged fuel filter
- Faulty fuel pressure sensor
- Faulty injector
- Faulty fuel flow control valve
What you can do
- 1Read the fault codes for the tank pump first and fix them. Then clear this code and road test the car
- 2Look for leaks in the fuel system and check that the fuel filter is not clogged
- 3Check the connector at the fuel pressure sensor for contact resistance, oxidation and looseness
- 4With diagnostic equipment, read the fuel pressure sensor's value at idle and check that it looks plausible
- 5Have a workshop check the injectors and the fuel flow control valve if the fault remains
Symptoms you may notice1
- Message in the information display
What the fault can affect1
- The pressure is calculated by the ECM instead of being measured
General guidance for car owners. Diagnosis on the car can point to a different cause.