VOLVO
ECM-25D0 - Fuel system. Pressure too high
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
8 modelsC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Show models by year and engine (20)
- Volvo C30 (2007–2013)2007Engine D5244T8, D5244T9 only
- Volvo C30 (2007–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo C70 (2006–2013)2007Engine D5244T8, D5244T9 only
- Volvo C70 (2006–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo S40 (2004–2013)2006Engine D5244T8 only
- Volvo S40 (2004–2013)2007Engine D5244T8, D5244T9 only
- Volvo S40 (2004–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo S60 (2001–2009)2006Engine D5244T4, D5244T5, D5244T6, D5244T7 only
- Volvo S60 (2001–2009)2007–2009Engine D5244T4, D5244T5, D5244T7 only
- Volvo V50 (2004–2013)2006Engine D5244T8 only
- Volvo V50 (2004–2013)2007Engine D5244T8, D5244T9 only
- Volvo V50 (2004–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo V70 (2000–2008)2006Engine D5244T4, D5244T5, D5244T6, D5244T7 only
- Volvo V70 (2000–2008)2007Engine D5244T4, D5244T5, D5244T7 only
- Volvo V70 (2000–2008)2008Engine D5244T5, D5244T7 only
- Volvo V70 XC / XC70 (2001–2007)2006–2007Engine D5244T4 only
- Volvo XC90 (2003–)2006–2007Engine D5244T4 only
- Volvo XC90 (2003–)2008–2010Engine D5244T4, D5244T5 only
- Volvo XC90 (2003–)2011Engine D5244T18, D5244T4, D5244T5 only
- Volvo XC90 (2003–)2012All engines except: B5254T2, B6324S5
What does this fault code mean?
If the ECM finds the pressure too high in an operating mode where only the fuel pressure control valve controls it, for example with a cold engine, the code is set. The cause may lie in the sensor or the valve.
Possible causes
- The fuel pressure sensor is damaged
- No voltage supply to the fuel pressure control valve
- The fuel pressure control valve is damaged
What you can do
- 1Read the code, clear it and road test the car to see whether it returns
- 2Check the connector at the fuel pressure sensor for contact resistance and oxidation
- 3Use a multimeter to check that the signal wire from the fuel pressure sensor has no open circuit
- 4With diagnostic equipment, read the fuel pressure sensor's live data when the engine is cold and check that the value looks reasonable
- 5Have a workshop check the voltage supply to the fuel pressure control valve if the fault remains
Symptoms you may notice3
- Message in the information display
- The engine knocks
- The engine stalls
What the fault can affect1
- The fuel pressure in the engine control module is replaced by a calculated value
General guidance for car owners. Diagnosis on the car can point to a different cause.