Skip to content
    OBD Tuning
    Send to us
    Send to us
    Home
    Fault Codes
    VOLVO
    ECM-2610
    VOLVO

    ECM-2610 - Fuel pump (FP) control module. Signal too low

    System

    Engine Control Module (ECM)

    Volvo models this fault code applies to

    This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.

    Applies to the following models:

    4 models

    C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

    Show models by year and engine (8)
    • Volvo C30 (2007–2013)2007–2011Engine B5244S4 only
    • Volvo C70 (2006–2013)2006All engines except: B5254T3
    • Volvo C70 (2006–2013)2007–2010Engine B5244S4, B5244S5 only
    • Volvo C70 (2006–2013)2011Engine B5244S4 only
    • Volvo S40 (2004–2013)2004Engine B5244S4, B5244S5 only
    • Volvo S40 (2004–2013)2005–2010Engine B5244S4, B5244S5, B5244S7 only
    • Volvo V50 (2004–2013)2004Engine B5244S4, B5244S5 only
    • Volvo V50 (2004–2013)2005–2010Engine B5244S4, B5244S5, B5244S7 only

    What does this fault code mean?

    The ECM monitors the control signal that goes to the fuel pump control module. If it registers a fault in that signal, the code is set. The fault may be a result of electrical faults in the fuel pump supply or its wiring.

    Possible causes

    • Contact resistance, oxidation or loose contact in connectors and connections
    • Signal wire between the ECM and the pump control module shorted to ground
    • Open circuit in the signal wire between the ECM and the pump control module

    What you can do

    1. 1Read the fault codes in the central electronic module (CEM) first, since this code may be a follow-on fault from electrical faults in the fuel pump supply
    2. 2Check the fuse and relay for the fuel pump control module and the fuel pump
    3. 3Check the earth point for the fuel pump control module and the fuel pump
    4. 4Check the connectors at the fuel pump control module for poor contact and oxidation
    5. 5Have a workshop check the fuel pump and its control module if the fault remains

    Symptoms you may notice5

    • Malfunction indicator lamp (MIL) on
    • Poor performance and the engine lacks power, especially when pulling away from a standstill
    • The engine hesitates or surges during acceleration or deceleration
    • The engine stalls, including at idle
    • The engine is hard to start or does not start

    General guidance for car owners. Diagnosis on the car can point to a different cause.

    OBD Tuning

    Sweden's leading expert center for automotive electronics. We offer professional ECU tuning, control unit repair and diagnostics with 12-month warranty.

    Services

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    Database & Diagnostics

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    ECU Manufacturers

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Company

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    Visit us

    Gjuterigatan 29, Karlstad

    Call us

    054-830 480

    Email us

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. All rights reserved.