VOLVO
ECM-2740 - Engine coolant temperature (ECT) sensor. Faulty signal
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
9 modelsC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Show models by year and engine (20)
- Volvo C30 (2007–2013)2007Engine B5254T3 only
- Volvo C30 (2007–2013)2008–2013Engine B5254T7 only
- Volvo C70 (2006–2013)2006–2007Engine B5254T3 only
- Volvo C70 (2006–2013)2008–2013Engine B5254T7 only
- Volvo S40 (2004–2013)2005–2007Engine B5254T3 only
- Volvo S40 (2004–2013)2008Engine B5254T3, B5254T7 only
- Volvo S40 (2004–2013)2009–2012Engine B5254T7 only
- Volvo S60 (2001–2009)2006Engine B5204T5, B5244T4, B5244T5, B5254T2, B5254T4 only
- Volvo S60 (2001–2009)2007Engine B5204T5, B5244T5, B5254T2, B5254T4 only
- Volvo S60 (2001–2009)2008–2009Engine B5204T5, B5244T5, B5254T2 only
- Volvo S80 (1999–2006)2006Engine B5204T5, B5254T2 only
- Volvo V50 (2004–2013)2005–2007Engine B5254T3 only
- Volvo V50 (2004–2013)2008–2012Engine B5254T7 only
- Volvo V70 (2000–2008)2006–2007Engine B5204T5, B5244T5, B5254T2, B5254T4 only
- Volvo V70 (2000–2008)2008Engine B5254T2 only
- Volvo V70 XC / XC70 (2001–2007)2006Engine B5244T4, B5254T2 only
- Volvo V70 XC / XC70 (2001–2007)2007Engine B5254T2 only
- Volvo XC90 (2003–)2005–2012Engine B5254T2 only
- Volvo XC90 (2003–)2013–2014Engine B5254T9 only
- Volvo XC90 (2003–)2015
What does this fault code mean?
After the engine starts the ECM works out a theoretical engine temperature. If the sensor gives a signal that does not change and does not match that value, the code is set. It can appear together with another fault code for the coolant temperature sensor.
Possible causes
- Poor contact with oxidation in the connector
- The engine coolant temperature sensor is damaged
- A thermostat that does not open
What you can do
- 1Read and fix the other fault code for the coolant temperature sensor first
- 2Disconnect the electric cooling fan before troubleshooting, since the fan can run even when the ignition is off
- 3Check the connector at the temperature sensor for contact resistance and oxidation
- 4Check the coolant level and the freeze protection, since a frozen sensor can cause this code
- 5Have a workshop replace the sensor or the thermostat if the fault remains
Symptoms you may notice2
- Malfunction indicator lamp (MIL) on
- The engine is hard to start
General guidance for car owners. Diagnosis on the car can point to a different cause.