VOLVO
ECM-2800 - Heated oxygen sensor (HO2S) signal. Faulty signal
System
Engine Control Module (ECM)
Volvo models this fault code applies to
This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.
Applies to the following models:
8 modelsC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Show models by year and engine (20)
- Volvo C30 (2007–2013)2007Engine D5244T8, D5244T9 only
- Volvo C30 (2007–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo C70 (2006–2013)2007Engine D5244T8, D5244T9 only
- Volvo C70 (2006–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo S40 (2004–2013)2006Engine D5244T8 only
- Volvo S40 (2004–2013)2007Engine D5244T8, D5244T9 only
- Volvo S40 (2004–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo S60 (2001–2009)2006Engine D5244T4, D5244T5, D5244T6, D5244T7 only
- Volvo S60 (2001–2009)2007–2009Engine D5244T4, D5244T5, D5244T7 only
- Volvo V50 (2004–2013)2006Engine D5244T8 only
- Volvo V50 (2004–2013)2007Engine D5244T8, D5244T9 only
- Volvo V50 (2004–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo V70 (2000–2008)2006Engine D5244T4, D5244T5, D5244T6, D5244T7 only
- Volvo V70 (2000–2008)2007Engine D5244T4, D5244T5, D5244T7 only
- Volvo V70 (2000–2008)2008Engine D5244T5, D5244T7 only
- Volvo V70 XC / XC70 (2001–2007)2006–2007Engine D5244T4 only
- Volvo XC90 (2003–)2006–2007Engine D5244T4 only
- Volvo XC90 (2003–)2008–2010Engine D5244T4, D5244T5 only
- Volvo XC90 (2003–)2011Engine D5244T18, D5244T4, D5244T5 only
- Volvo XC90 (2003–)2012All engines except: B5254T2, B6324S5
What does this fault code mean?
The engine control module (ECM) uses the signal from the heated oxygen sensor to regulate the fuel and air mixture. The fault is stored when the control module detects that the sensor signal is wrong, for example too high, too low or missing altogether. The cause may be the sensor, the wiring between the sensor and the control module, or the connectors.
Possible causes
- Damaged heated oxygen sensor (HO2S)
- Signal cable short-circuited to supply voltage, giving a signal that is too high
- Signal cable short-circuited to ground, giving a signal that is too low
- Open circuit in the signal cable, so the signal is missing
- Contact resistance or oxidation in the connections
What you can do
- 1Read the code, clear it and drive for a while to see whether it returns
- 2Switch off the ignition and check the oxygen sensor connector: it should be secure, clean and free from oxidation
- 3Check that the signal cable from the oxygen sensor is not chafed or pinched and does not run against hot parts of the exhaust system
- 4With the car switched off, use a multimeter to check that the signal cable is not broken and has no contact with ground or supply voltage
- 5If you have a diagnostic tool: check in live data that the oxygen sensor value changes while driving. A value that stays completely still indicates a faulty signal
Symptoms you may notice1
- Message in the information display
General guidance for car owners. Diagnosis on the car can point to a different cause.