VOLVO
ECM-2820 - Heated oxygen sensor (HO2S). Faulty signal
System
Engine Control Module (ECM)
Volvo models this fault code applies to
This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.
Applies to the following models:
8 modelsC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Show models by year and engine (20)
- Volvo C30 (2007–2013)2007Engine D5244T8, D5244T9 only
- Volvo C30 (2007–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo C70 (2006–2013)2007Engine D5244T8, D5244T9 only
- Volvo C70 (2006–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo S40 (2004–2013)2006Engine D5244T8 only
- Volvo S40 (2004–2013)2007Engine D5244T8, D5244T9 only
- Volvo S40 (2004–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo S60 (2001–2009)2006Engine D5244T4, D5244T5, D5244T6, D5244T7 only
- Volvo S60 (2001–2009)2007–2009Engine D5244T4, D5244T5, D5244T7 only
- Volvo V50 (2004–2013)2006Engine D5244T8 only
- Volvo V50 (2004–2013)2007Engine D5244T8, D5244T9 only
- Volvo V50 (2004–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo V70 (2000–2008)2006Engine D5244T4, D5244T5, D5244T6, D5244T7 only
- Volvo V70 (2000–2008)2007Engine D5244T4, D5244T5, D5244T7 only
- Volvo V70 (2000–2008)2008Engine D5244T5, D5244T7 only
- Volvo V70 XC / XC70 (2001–2007)2006–2007Engine D5244T4 only
- Volvo XC90 (2003–)2006–2007Engine D5244T4 only
- Volvo XC90 (2003–)2008–2010Engine D5244T4, D5244T5 only
- Volvo XC90 (2003–)2011Engine D5244T18, D5244T4, D5244T5 only
- Volvo XC90 (2003–)2012All engines except: B5254T2, B6324S5
What does this fault code mean?
The oxygen sensor gives the engine control module information about the fuel and air mixture, and this fault concerns the signal ground for that sensor. The fault is stored when the control module finds that the sensor signal ground is incorrect. The cause may be the ground wire, the sensor or the connections.
Possible causes
- Ground wire shorted to supply voltage
- Ground wire shorted to ground
- Open circuit in the ground wire
- Contact resistance or oxidation in the connections
- Damaged oxygen sensor
What you can do
- 1Read the code, clear it and drive for a while to see whether it returns
- 2Switch off the ignition and check the oxygen sensor connector and the earth point of the sensor ground wire. They should be clean and secure, free from oxidation and contact resistance
- 3With the car switched off, use a multimeter to check that the ground wire to the sensor is not broken and is not touching voltage
- 4If you have a diagnostic tool: watch the oxygen sensor value in live data while driving. A value that stays completely still suggests the sensor ground is not working
- 5If the earth and connections are in order but the fault remains, have a workshop check the sensor with diagnostic equipment
Symptoms you may notice1
- Message in the information display
General guidance for car owners. Diagnosis on the car can point to a different cause.