VOLVO
ECM-290C - Fuel pressure. Signal too high
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
9 modelsC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Show models by year and engine (23)
- Volvo C30 (2007–2013)2007Engine B5254T3 only
- Volvo C30 (2007–2013)2008–2013Engine B5254T7 only
- Volvo C70 (2006–2013)2006–2007Engine B5254T3 only
- Volvo C70 (2006–2013)2008–2013Engine B5254T7 only
- Volvo S40 (2004–2013)2005–2007Engine B5254T3 only
- Volvo S40 (2004–2013)2008Engine B5254T3, B5254T7 only
- Volvo S40 (2004–2013)2009–2012Engine B5254T7 only
- Volvo S60 (2001–2009)2005–2006Engine B5204T5, B5244T4, B5244T5, B5254T2, B5254T4 only
- Volvo S60 (2001–2009)2007Engine B5204T5, B5244T5, B5254T2, B5254T4 only
- Volvo S60 (2001–2009)2008–2009Engine B5204T5, B5244T5, B5254T2 only
- Volvo S80 (1999–2006)2005–2006Engine B5204T5, B5244T4, B5254T2, B6294S2, B6294T only
- Volvo V50 (2004–2013)2005–2007Engine B5254T3 only
- Volvo V50 (2004–2013)2008–2012Engine B5254T7 only
- Volvo V70 (2000–2008)2005Engine B5204T5, B5244T4, B5244T5, B5254T2, B5254T4 only
- Volvo V70 (2000–2008)2006–2007Engine B5204T5, B5244T5, B5254T2, B5254T4 only
- Volvo V70 (2000–2008)2008Engine B5254T2 only
- Volvo V70 XC / XC70 (2001–2007)2005All engines except: D5244T
- Volvo V70 XC / XC70 (2001–2007)2006Engine B5244T4, B5254T2 only
- Volvo V70 XC / XC70 (2001–2007)2007Engine B5254T2 only
- Volvo XC90 (2003–)2005–2006Engine B5254T2, B6294T only
- Volvo XC90 (2003–)2007–2012Engine B5254T2 only
- Volvo XC90 (2003–)2013–2014Engine B5254T9 only
- Volvo XC90 (2003–)2015
What does this fault code mean?
The engine control module controls the fuel pressure through the fuel pump control module. The fault is stored when the measured pressure rises too high compared with the requested pressure for a certain time, and the cause may lie in the pressure sensor, the pump control module or the pump.
Possible causes
- Damaged fuel pressure sensor
- Damaged fuel pump control module
- Damaged fuel pump
What you can do
- 1Read the codes first; stored faults on the pressure sensors should be dealt with before anything else
- 2Check the connectors that join the pump control unit to the pump for resistance and oxide
- 3Check the connector at the fuel pressure sensor, which should be secure and clean
- 4If you have a diagnostic tool: read the relative fuel pressure in live data with the engine warm and idling, and see how it changes when you rev the engine
- 5If no fault is found, have a workshop try a new pump control unit
Symptoms you may notice5
- Reduced engine performance
- Engine may stall at any time
- Engine hesitates, surges or runs unevenly under acceleration
- Engine starts poorly or does not start at all
- Check engine lamp comes on or behaves abnormally
General guidance for car owners. Diagnosis on the car can point to a different cause.