VOLVO
ECM-291B - Fuel pump control module. Signal missing
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
9 modelsC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Show models by year and engine (23)
- Volvo C30 (2007–2013)2007Engine B5254T3 only
- Volvo C30 (2007–2013)2008–2013Engine B5254T7 only
- Volvo C70 (2006–2013)2006–2007Engine B5254T3 only
- Volvo C70 (2006–2013)2008–2013Engine B5254T7 only
- Volvo S40 (2004–2013)2005–2007Engine B5254T3 only
- Volvo S40 (2004–2013)2008Engine B5254T3, B5254T7 only
- Volvo S40 (2004–2013)2009–2012Engine B5254T7 only
- Volvo S60 (2001–2009)2005–2006Engine B5204T5, B5244T4, B5244T5, B5254T2, B5254T4 only
- Volvo S60 (2001–2009)2007Engine B5204T5, B5244T5, B5254T2, B5254T4 only
- Volvo S60 (2001–2009)2008–2009Engine B5204T5, B5244T5, B5254T2 only
- Volvo S80 (1999–2006)2005–2006Engine B5204T5, B5244T4, B5254T2, B6294S2, B6294T only
- Volvo V50 (2004–2013)2005–2007Engine B5254T3 only
- Volvo V50 (2004–2013)2008–2012Engine B5254T7 only
- Volvo V70 (2000–2008)2005Engine B5204T5, B5244T4, B5244T5, B5254T2, B5254T4 only
- Volvo V70 (2000–2008)2006–2007Engine B5204T5, B5244T5, B5254T2, B5254T4 only
- Volvo V70 (2000–2008)2008Engine B5254T2 only
- Volvo V70 XC / XC70 (2001–2007)2005All engines except: D5244T
- Volvo V70 XC / XC70 (2001–2007)2006Engine B5244T4, B5254T2 only
- Volvo V70 XC / XC70 (2001–2007)2007Engine B5254T2 only
- Volvo XC90 (2003–)2005–2006Engine B5254T2, B6294T only
- Volvo XC90 (2003–)2007–2012Engine B5254T2 only
- Volvo XC90 (2003–)2013–2014Engine B5254T9 only
- Volvo XC90 (2003–)2015
What does this fault code mean?
The engine control module controls the fuel pressure through the fuel pump control module using a PWM signal. The code is stored when that PWM signal is missing, which can point to a damaged pump control module, a break or short in the signal wire, or a fault in the supply or ground to the control module and pump.
Possible causes
- Signal cable shorted to supply voltage
- Damaged fuel pump control module
- Break in the signal cable linking the engine control module to the pump control module
- Poor contact, oxide or loose fit in the connectors and connections
- Damaged earth connection to the pump control module and fuel pump
What you can do
- 1If you have a diagnostic tool: read the fuel pump load in live data with the engine warm and idling. A missing or wrong value points to a lasting fault
- 2Check the voltage supply to the pump control module and pump, including the relay and fuse
- 3Check that the earth connection to the pump control module and pump is secure and clean
- 4Check the connector at the pump control module for contact resistance and oxide
- 5Trace the signal wire from the engine control module to the pump control module, looking for breaks and for shorts to ground or voltage
Symptoms you may notice5
- Starter turns, but the engine does not fire
- Engine stops
- Engine lacks power, especially when moving off
- Engine hesitates, surges or runs unevenly under acceleration and when slowing down
- Check engine lamp comes on or behaves abnormally
General guidance for car owners. Diagnosis on the car can point to a different cause.