VOLVO
ECM-2A10 - Fuel temperature sensor. Signal too high
System
Engine Control Module (ECM)
Volvo models this fault code applies to
This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.
Applies to the following models:
9 modelsC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Show models by year and engine (20)
- Volvo C30 (2007–2013)2007Engine B5254T3 only
- Volvo C30 (2007–2013)2008–2013Engine B5254T7 only
- Volvo C70 (2006–2013)2006–2007Engine B5254T3 only
- Volvo C70 (2006–2013)2008–2013Engine B5254T7 only
- Volvo S40 (2004–2013)2006–2007Engine B5254T3 only
- Volvo S40 (2004–2013)2008Engine B5254T3, B5254T7 only
- Volvo S40 (2004–2013)2009–2012Engine B5254T7 only
- Volvo S60 (2001–2009)2006Engine B5204T5, B5244T4, B5244T5, B5254T2, B5254T4 only
- Volvo S60 (2001–2009)2007Engine B5204T5, B5244T5, B5254T2, B5254T4 only
- Volvo S60 (2001–2009)2008–2009Engine B5204T5, B5244T5, B5254T2 only
- Volvo S80 (1999–2006)2006Engine B5204T5, B5254T2 only
- Volvo V50 (2004–2013)2006–2007Engine B5254T3 only
- Volvo V50 (2004–2013)2008–2012Engine B5254T7 only
- Volvo V70 (2000–2008)2006–2007Engine B5204T5, B5244T5, B5254T2, B5254T4 only
- Volvo V70 (2000–2008)2008Engine B5254T2 only
- Volvo V70 XC / XC70 (2001–2007)2006Engine B5244T4, B5254T2 only
- Volvo V70 XC / XC70 (2001–2007)2007Engine B5254T2 only
- Volvo XC90 (2003–)2006–2012Engine B5254T2 only
- Volvo XC90 (2003–)2013–2014Engine B5254T9 only
- Volvo XC90 (2003–)2015
What does this fault code mean?
The engine control module compares the fuel temperature signal while driving with the readings from the intake and engine temperature sensors. If the fuel temperature deviates too far from the others, the fault is set. The cause may be poor contact or a damaged fuel temperature sensor.
Possible causes
- Contact resistance or oxidation in the connections
- Damaged fuel temperature sensor
What you can do
- 1Switch off the ignition and check the connector at the fuel pressure sensor, where the temperature sensor sits: it should be secure and clean
- 2With a diagnostic tool, compare the fuel temperature in live data with the intake air and engine temperatures. When the engine is cold these should be close to each other
- 3Start the engine, let it warm up and read the code again to see whether the fault remains
- 4If the connector is in order but the fault remains, have a workshop check the fuel temperature sensor, which is built into the fuel pressure sensor
Symptoms you may notice1
- Malfunction indicator lamp (MIL) lit
What the fault can affect1
- A predefined fuel temperature value is used
General guidance for car owners. Diagnosis on the car can point to a different cause.