VOLVO
ECM-2A1C - Fuel temperature sensor. Signal too high
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
9 modelsC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Show models by year and engine (20)
- Volvo C30 (2007–2013)2007Engine B5254T3 only
- Volvo C30 (2007–2013)2008–2013Engine B5254T7 only
- Volvo C70 (2006–2013)2006–2007Engine B5254T3 only
- Volvo C70 (2006–2013)2008–2013Engine B5254T7 only
- Volvo S40 (2004–2013)2006–2007Engine B5254T3 only
- Volvo S40 (2004–2013)2008Engine B5254T3, B5254T7 only
- Volvo S40 (2004–2013)2009–2012Engine B5254T7 only
- Volvo S60 (2001–2009)2006Engine B5204T5, B5244T4, B5244T5, B5254T2, B5254T4 only
- Volvo S60 (2001–2009)2007Engine B5204T5, B5244T5, B5254T2, B5254T4 only
- Volvo S60 (2001–2009)2008–2009Engine B5204T5, B5244T5, B5254T2 only
- Volvo S80 (1999–2006)2006Engine B5204T5, B5254T2 only
- Volvo V50 (2004–2013)2006–2007Engine B5254T3 only
- Volvo V50 (2004–2013)2008–2012Engine B5254T7 only
- Volvo V70 (2000–2008)2006–2007Engine B5204T5, B5244T5, B5254T2, B5254T4 only
- Volvo V70 (2000–2008)2008Engine B5254T2 only
- Volvo V70 XC / XC70 (2001–2007)2006Engine B5244T4, B5254T2 only
- Volvo V70 XC / XC70 (2001–2007)2007Engine B5254T2 only
- Volvo XC90 (2003–)2006–2012Engine B5254T2 only
- Volvo XC90 (2003–)2013–2014Engine B5254T9 only
- Volvo XC90 (2003–)2015
What does this fault code mean?
The control module saves the fuel, intake and engine temperature readings at the moment of start and compares them afterwards. The code is set when the fuel temperature is too far above the others. The cause may be a damaged fuel temperature sensor or poor contact in the connections.
Possible causes
- Damaged fuel temperature sensor
- Contact resistance or oxidation in the connections
What you can do
- 1With a diagnostic tool, read the fuel temperature in live data at the moment a cold engine starts and compare it with the intake and engine temperatures
- 2Switch off the ignition and check the connector at the fuel pressure sensor for contact resistance and oxidation
- 3Start the engine, let it run for a while and read the code again to see whether it returns
- 4If the connector is in order but the fault remains, have a workshop check the fuel temperature sensor with diagnostic equipment
Symptoms you may notice1
- Malfunction indicator lamp (MIL) lit
What the fault can affect1
- A predefined value is used for the fuel temperature
General guidance for car owners. Diagnosis on the car can point to a different cause.