VOLVO
ECM-2A1D - Fuel temperature sensor. Signal too low
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
9 modelsC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Show models by year and engine (20)
- Volvo C30 (2007–2013)2007Engine B5254T3 only
- Volvo C30 (2007–2013)2008–2013Engine B5254T7 only
- Volvo C70 (2006–2013)2006–2007Engine B5254T3 only
- Volvo C70 (2006–2013)2008–2013Engine B5254T7 only
- Volvo S40 (2004–2013)2006–2007Engine B5254T3 only
- Volvo S40 (2004–2013)2008Engine B5254T3, B5254T7 only
- Volvo S40 (2004–2013)2009–2012Engine B5254T7 only
- Volvo S60 (2001–2009)2006Engine B5204T5, B5244T4, B5244T5, B5254T2, B5254T4 only
- Volvo S60 (2001–2009)2007Engine B5204T5, B5244T5, B5254T2, B5254T4 only
- Volvo S60 (2001–2009)2008–2009Engine B5204T5, B5244T5, B5254T2 only
- Volvo S80 (1999–2006)2006Engine B5204T5, B5254T2 only
- Volvo V50 (2004–2013)2006–2007Engine B5254T3 only
- Volvo V50 (2004–2013)2008–2012Engine B5254T7 only
- Volvo V70 (2000–2008)2006–2007Engine B5204T5, B5244T5, B5254T2, B5254T4 only
- Volvo V70 (2000–2008)2008Engine B5254T2 only
- Volvo V70 XC / XC70 (2001–2007)2006Engine B5244T4, B5254T2 only
- Volvo V70 XC / XC70 (2001–2007)2007Engine B5254T2 only
- Volvo XC90 (2003–)2006–2012Engine B5254T2 only
- Volvo XC90 (2003–)2013–2014Engine B5254T9 only
- Volvo XC90 (2003–)2015
What does this fault code mean?
The engine control module (ECM) has registered that the signal from the fuel temperature sensor is too low. At start-up the module compares the fuel temperature with the intake air and engine temperatures, and the fuel temperature reading is too low compared with the others. The fault code concerns the signal from the sensor.
Possible causes
- Damaged fuel temperature sensor
- Contact resistance or oxidation in the connections
What you can do
- 1Read and note the code, clear it and road test to see whether it returns
- 2Check the connector at the fuel temperature sensor for loose connections, corrosion and contact resistance
- 3Read the fuel, intake and engine temperatures in live data right at start-up. If the fuel temperature differs clearly from the others, the sensor or its connector is the likely cause
- 4The sensor is built into the fuel pressure sensor. If the fault remains, have a workshop check or replace it
Symptoms you may notice1
- The malfunction indicator light (MIL) is on
What the fault can affect1
- The control module uses a fixed predefined value for fuel temperature
General guidance for car owners. Diagnosis on the car can point to a different cause.