VOLVO
ECM-2A30 - Particulate trap. Blocked
System
Engine Control Module (ECM)
Volvo models this fault code applies to
This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.
Applies to the following models:
8 modelsC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Show models by year and engine (20)
- Volvo C30 (2007–2013)2007Engine D5244T8, D5244T9 only
- Volvo C30 (2007–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo C70 (2006–2013)2007Engine D5244T8, D5244T9 only
- Volvo C70 (2006–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo S40 (2004–2013)2006Engine D5244T8 only
- Volvo S40 (2004–2013)2007Engine D5244T8, D5244T9 only
- Volvo S40 (2004–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo S60 (2001–2009)2006Engine D5244T4, D5244T5, D5244T6, D5244T7 only
- Volvo S60 (2001–2009)2007–2009Engine D5244T4, D5244T5, D5244T7 only
- Volvo V50 (2004–2013)2006Engine D5244T8 only
- Volvo V50 (2004–2013)2007Engine D5244T8, D5244T9 only
- Volvo V50 (2004–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo V70 (2000–2008)2006Engine D5244T4, D5244T5, D5244T6, D5244T7 only
- Volvo V70 (2000–2008)2007Engine D5244T4, D5244T5, D5244T7 only
- Volvo V70 (2000–2008)2008Engine D5244T5, D5244T7 only
- Volvo V70 XC / XC70 (2001–2007)2006–2007Engine D5244T4 only
- Volvo XC90 (2003–)2006–2007Engine D5244T4 only
- Volvo XC90 (2003–)2008–2010Engine D5244T4, D5244T5 only
- Volvo XC90 (2003–)2011Engine D5244T18, D5244T4, D5244T5 only
- Volvo XC90 (2003–)2012Engine D5244T18, D5244T5 only
What does this fault code mean?
The engine control module (ECM) calculates how much soot is in the particulate trap and monitors the pressure difference before and after the trap. The fault code is set when the soot quantity is too high, meaning the trap is clogged.
Possible causes
- Clogged particulate trap
- Damaged pressure sensor for the particulate trap
What you can do
- 1Read and note other fault codes in the module and trace those first, as this code can be caused by faults in other parts of the engine
- 2Check that the intake system is airtight and undamaged
- 3Check that the hoses and pipes to the particulate trap pressure sensor are not damaged or leaking
- 4If you have a diagnostic tool: compare the pressure difference across the particulate trap in live data with the engine at idle. A clearly high value suggests the trap is blocked
- 5Have a workshop with diagnostic equipment assess the soot level and decide whether the trap can be cleaned or must be replaced
Symptoms you may notice2
- Poor performance
- The malfunction indicator light (MIL) comes on
What the fault can affect1
- Engine output and engine speed are limited
General guidance for car owners. Diagnosis on the car can point to a different cause.