VOLVO
ECM-314C - Misfire cylinder 4. Catalytic converter damage
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
9 modelsC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Show models by year and engine (22)
- Volvo C30 (2007–2013)2007Engine B5254T3 only
- Volvo C30 (2007–2013)2008–2013Engine B5254T7 only
- Volvo C70 (2006–2013)2006–2007Engine B5254T3 only
- Volvo C70 (2006–2013)2008–2013Engine B5254T7 only
- Volvo S40 (2004–2013)2005–2007Engine B5254T3 only
- Volvo S40 (2004–2013)2008Engine B5254T3, B5254T7 only
- Volvo S40 (2004–2013)2009–2012Engine B5254T7 only
- Volvo S60 (2001–2009)2005–2006Engine B5204T5, B5244T4, B5244T5, B5254T2, B5254T4 only
- Volvo S60 (2001–2009)2007Engine B5204T5, B5244T5, B5254T2, B5254T4 only
- Volvo S60 (2001–2009)2008–2009Engine B5204T5, B5244T5, B5254T2 only
- Volvo S80 (1999–2006)2005–2006Engine B5204T5, B5244T4, B5254T2 only
- Volvo V50 (2004–2013)2005–2007Engine B5254T3 only
- Volvo V50 (2004–2013)2008–2012Engine B5254T7 only
- Volvo V70 (2000–2008)2005Engine B5204T5, B5244T4, B5244T5, B5254T2, B5254T4 only
- Volvo V70 (2000–2008)2006–2007Engine B5204T5, B5244T5, B5254T2, B5254T4 only
- Volvo V70 (2000–2008)2008Engine B5254T2 only
- Volvo V70 XC / XC70 (2001–2007)2005All engines except: D5244T
- Volvo V70 XC / XC70 (2001–2007)2006Engine B5244T4, B5254T2 only
- Volvo V70 XC / XC70 (2001–2007)2007Engine B5254T2 only
- Volvo XC90 (2003–)2005–2012Engine B5254T2 only
- Volvo XC90 (2003–)2013–2014Engine B5254T9 only
- Volvo XC90 (2003–)2015
What does this fault code mean?
Cylinder four has misfired in a way that can damage the catalytic converter, and this was detected during the first revolutions after starting. The code indicates cylinder four. The fault should be corrected soon so that the catalytic converter is not damaged.
Possible causes
- Contaminated or incorrect fuel
- Poor fuel quality, for example summer fuel in winter
- Air leakage
- Blocked crankcase ventilation
- Faulty fuel pressure
- Uneven compression
What you can do
- 1First investigate the other fault codes that affect camshaft control or the camshaft reset valve
- 2Check the fuel level and that the engine oil level is correct
- 3Check that the fuel suits the season and that the tank is not contaminated
- 4Check the spark plug on cylinder four
- 5Check the intake for leaks and the crankcase ventilation for blockages
- 6If the fault remains, have a workshop check the fuel pressure and the compression on cylinder four
Symptoms you may notice4
- Engine warning lamp lit
- The engine misfires
- Poor performance
- The engine runs roughly on one cylinder
What the fault can affect2
- Catalytic converter diagnosis is switched off
- Lambda control is switched off
General guidance for car owners. Diagnosis on the car can point to a different cause.