VOLVO
ECM-434C - Fuel tank system, leakage. Minor leak
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
9 modelsC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Show models by year and engine (23)
- Volvo C30 (2007–2013)2007Engine B5254T3 only
- Volvo C30 (2007–2013)2008–2013Engine B5254T7 only
- Volvo C70 (2006–2013)2006–2007Engine B5254T3 only
- Volvo C70 (2006–2013)2008–2013Engine B5254T7 only
- Volvo S40 (2004–2013)2005–2007Engine B5254T3 only
- Volvo S40 (2004–2013)2008Engine B5254T3, B5254T7 only
- Volvo S40 (2004–2013)2009–2012Engine B5254T7 only
- Volvo S60 (2001–2009)2005–2006Engine B5204T5, B5244T4, B5244T5, B5254T2, B5254T4 only
- Volvo S60 (2001–2009)2007Engine B5204T5, B5244T5, B5254T2, B5254T4 only
- Volvo S60 (2001–2009)2008–2009Engine B5204T5, B5244T5, B5254T2 only
- Volvo S80 (1999–2006)2005–2006Engine B5204T5, B5244T4, B5254T2, B6294S2, B6294T only
- Volvo V50 (2004–2013)2005–2007Engine B5254T3 only
- Volvo V50 (2004–2013)2008–2012Engine B5254T7 only
- Volvo V70 (2000–2008)2005Engine B5204T5, B5244T4, B5244T5, B5254T2, B5254T4 only
- Volvo V70 (2000–2008)2006–2007Engine B5204T5, B5244T5, B5254T2, B5254T4 only
- Volvo V70 (2000–2008)2008Engine B5254T2 only
- Volvo V70 XC / XC70 (2001–2007)2005All engines except: D5244T
- Volvo V70 XC / XC70 (2001–2007)2006Engine B5244T4, B5254T2 only
- Volvo V70 XC / XC70 (2001–2007)2007Engine B5254T2 only
- Volvo XC90 (2003–)2005–2006Engine B5254T2, B6294T only
- Volvo XC90 (2003–)2007–2012Engine B5254T2 only
- Volvo XC90 (2003–)2013–2014Engine B5254T9 only
- Volvo XC90 (2003–)2015
What does this fault code mean?
If the leak diagnostic unit has no fault, the engine control module runs a leak test of the fuel tank system. The fault code is set when it finds a minor leak, meaning a very small leak, in the tank, the filler pipe, the filler cap, the canister, the EVAP valve, the leak diagnostic unit or the hoses between them. The fault shows up as the malfunction indicator lamp lighting.
Possible causes
- A small leak in the fuel tank, filler pipe or filler cap
- A small leak in the canister, EVAP valve, leak diagnostic unit or the hoses between them
What you can do
- 1Have a workshop check the engine control module software on cars of model year 2003 to 2008 before the leak is searched for
- 2Check that the filler cap is on and fully tightened, and that its seal is undamaged
- 3Inspect hoses and joints at the unit, canister, EVAP valve and filler pipe by eye
- 4Have a workshop run a new quick test after the repair to confirm the problem is solved
- 5Have you got a diagnostic tool: read the tank pressure in live data at idle and check whether it falls when the canister purge valve is activated
Symptoms you may notice1
- Malfunction indicator lamp (MIL) is on
General guidance for car owners. Diagnosis on the car can point to a different cause.