VOLVO
ECM-439C - Fuel tank system, leakage. Major leak
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
9 modelsC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Show models by year and engine (23)
- Volvo C30 (2007–2013)2007Engine B5254T3 only
- Volvo C30 (2007–2013)2008–2013Engine B5254T7 only
- Volvo C70 (2006–2013)2006–2007Engine B5254T3 only
- Volvo C70 (2006–2013)2008–2013Engine B5254T7 only
- Volvo S40 (2004–2013)2005–2007Engine B5254T3 only
- Volvo S40 (2004–2013)2008Engine B5254T3, B5254T7 only
- Volvo S40 (2004–2013)2009–2012Engine B5254T7 only
- Volvo S60 (2001–2009)2005–2006Engine B5204T5, B5244T4, B5244T5, B5254T2, B5254T4 only
- Volvo S60 (2001–2009)2007Engine B5204T5, B5244T5, B5254T2, B5254T4 only
- Volvo S60 (2001–2009)2008–2009Engine B5204T5, B5244T5, B5254T2 only
- Volvo S80 (1999–2006)2005–2006Engine B5204T5, B5244T4, B5254T2, B6294S2, B6294T only
- Volvo V50 (2004–2013)2005–2007Engine B5254T3 only
- Volvo V50 (2004–2013)2008–2012Engine B5254T7 only
- Volvo V70 (2000–2008)2005Engine B5204T5, B5244T4, B5244T5, B5254T2, B5254T4 only
- Volvo V70 (2000–2008)2006–2007Engine B5204T5, B5244T5, B5254T2, B5254T4 only
- Volvo V70 (2000–2008)2008Engine B5254T2 only
- Volvo V70 XC / XC70 (2001–2007)2005All engines except: D5244T
- Volvo V70 XC / XC70 (2001–2007)2006Engine B5244T4, B5254T2 only
- Volvo V70 XC / XC70 (2001–2007)2007Engine B5254T2 only
- Volvo XC90 (2003–)2005–2006Engine B5254T2, B6294T only
- Volvo XC90 (2003–)2007–2012Engine B5254T2 only
- Volvo XC90 (2003–)2013–2014Engine B5254T9 only
- Volvo XC90 (2003–)2015
What does this fault code mean?
If the leak diagnostic unit has no fault, the engine control module runs a leak diagnosis of the fuel tank system. If it finds a leak larger than the major-leak limit, for example in the tank, the filler pipe, the filler cap, the canister, the EVAP valve or the hoses between them, the fault code is set. A filler cap that is missing or not tightened is one of the causes.
Possible causes
- Fuel tank filler cap missing or not properly tightened
- Major leak in the tank, filler pipe, filler cap, canister, EVAP valve or in the hoses between them
What you can do
- 1Check that the filler cap is correctly fitted and that its seal is undamaged
- 2Check hoses and joints at the unit, the canister, the EVAP valve and the filler pipe by eye
- 3Loose caps and loose hose joints can be hard to find, so go through them carefully
- 4Have a workshop plug the canister-to-valve hose and run a new quick test, to see whether the leak is in the EVAP valve
- 5Have a workshop with diagnostic equipment run a quick test of the fuel tank system after the repair to check that the fault is gone
Symptoms you may notice1
- Malfunction indicator lamp (MIL) is on
General guidance for car owners. Diagnosis on the car can point to a different cause.