VOLVO
ECM-5730 - Communication, Transmission Control Module (TCM). Signal missing
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
8 modelsC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Show models by year and engine (20)
- Volvo C30 (2007–2013)2007Engine D5244T8, D5244T9 only
- Volvo C30 (2007–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo C70 (2006–2013)2007Engine D5244T8, D5244T9 only
- Volvo C70 (2006–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo S40 (2004–2013)2006Engine D5244T8 only
- Volvo S40 (2004–2013)2007Engine D5244T8, D5244T9 only
- Volvo S40 (2004–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo S60 (2001–2009)2006Engine D5244T4, D5244T5, D5244T6, D5244T7 only
- Volvo S60 (2001–2009)2007–2009Engine D5244T4, D5244T5, D5244T7 only
- Volvo V50 (2004–2013)2006Engine D5244T8 only
- Volvo V50 (2004–2013)2007Engine D5244T8, D5244T9 only
- Volvo V50 (2004–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo V70 (2000–2008)2006Engine D5244T4, D5244T5, D5244T6, D5244T7 only
- Volvo V70 (2000–2008)2007Engine D5244T4, D5244T5, D5244T7 only
- Volvo V70 (2000–2008)2008Engine D5244T5, D5244T7 only
- Volvo V70 XC / XC70 (2001–2007)2006–2007Engine D5244T4 only
- Volvo XC90 (2003–)2006–2007Engine D5244T4 only
- Volvo XC90 (2003–)2008–2010Engine D5244T4, D5244T5 only
- Volvo XC90 (2003–)2011Engine D5244T18, D5244T4, D5244T5 only
- Volvo XC90 (2003–)2012Engine D5244T18, D5244T5 only
What does this fault code mean?
The engine control module (ECM) has detected a fault in the reading coming from the transmission control module (TCM), and the code is stored. The accelerator pedal responds poorly, and engine torque is limited to a calculated reasonable value. The cause may lie in the CAN communication or in the transmission module.
Possible causes
- Faulty CAN communication
- The fault lies in the transmission control module (TCM)
What you can do
- 1Read and note the codes in the transmission control module (TCM) first
- 2Then read the CAN-related codes in the CEM and fix the faults there
- 3Check that the connectors on the CAN network are fully seated and free from oxidation
- 4Clear the code only once the causes are fixed, then road test
Symptoms you may notice3
- The accelerator pedal responds poorly
- A message is shown in the text display
- The environment lamp lights up
What the fault can affect1
- Requested engine torque is limited to a calculated reasonable value
General guidance for car owners. Diagnosis on the car can point to a different cause.