Skip to content
    OBD Tuning
    Send to us
    Send to us
    Home
    Fault Codes
    VOLVO
    ECM-5A20
    VOLVO

    ECM-5A20 - pre-supply pump. Power supply missing

    System

    Engine Control Module (ECM)

    Volvo models this fault code applies to

    This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.

    Applies to the following models:

    4 models

    C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

    Show models by year and engine (10)
    • Volvo C30 (2007–2013)2007Engine D5244T8, D5244T9 only
    • Volvo C30 (2007–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
    • Volvo C70 (2006–2013)2007Engine D5244T8, D5244T9 only
    • Volvo C70 (2006–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
    • Volvo S40 (2004–2013)2006Engine D5244T8 only
    • Volvo S40 (2004–2013)2007Engine D5244T8, D5244T9 only
    • Volvo S40 (2004–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
    • Volvo V50 (2004–2013)2006Engine D5244T8 only
    • Volvo V50 (2004–2013)2007Engine D5244T8, D5244T9 only
    • Volvo V50 (2004–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only

    What does this fault code mean?

    The engine control module (ECM) receives feed pump information over the CAN network. The code is set when the feed pump and the fuel pressure are both faulty at the same time. Engine performance may suffer or the engine may be hard to start, and a message is shown in the display.

    Possible causes

    • No voltage supply to the feed pump
    • Fuel system fault, according to the other fault codes
    • Feed pump signal missing or faulty on the CAN network
    • Fault in the rear control module (REM)

    What you can do

    1. 1Read the codes in the engine control module and fix those for the fuel system first
    2. 2Check that the relevant fuses for the feed pump are intact
    3. 3With a multimeter, check that the supply lead to the feed pump is not broken
    4. 4If you have a diagnostic tool, activate the feed pump with it and listen for it to start
    5. 5If the fault remains, have a workshop check the fuel pressure and the CAN communication to the rear control module

    Symptoms you may notice3

    • A message is shown in the text display
    • Reduced performance
    • The engine does not start

    General guidance for car owners. Diagnosis on the car can point to a different cause.

    OBD Tuning

    Sweden's leading expert center for automotive electronics. We offer professional ECU tuning, control unit repair and diagnostics with 12-month warranty.

    Services

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    Database & Diagnostics

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    ECU Manufacturers

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Company

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    Visit us

    Gjuterigatan 29, Karlstad

    Call us

    054-830 480

    Email us

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. All rights reserved.