VOLVO
ECM-6110 - Camshaft position control, intake. Slow
System
Engine Control Module (ECM)
Volvo models this fault code applies to
This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.
Applies to the following models:
9 modelsC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Show models by year and engine (23)
- Volvo C30 (2007–2013)2007Engine B5254T3 only
- Volvo C30 (2007–2013)2008–2013Engine B5254T7 only
- Volvo C70 (2006–2013)2006–2007Engine B5254T3 only
- Volvo C70 (2006–2013)2008–2013Engine B5254T7 only
- Volvo S40 (2004–2013)2005–2007Engine B5254T3 only
- Volvo S40 (2004–2013)2008Engine B5254T3, B5254T7 only
- Volvo S40 (2004–2013)2009–2012Engine B5254T7 only
- Volvo S60 (2001–2009)2005–2006Engine B5204T5, B5244T4, B5244T5, B5254T2, B5254T4 only
- Volvo S60 (2001–2009)2007Engine B5204T5, B5244T5, B5254T2, B5254T4 only
- Volvo S60 (2001–2009)2008–2009Engine B5204T5, B5244T5, B5254T2 only
- Volvo S80 (1999–2006)2005–2006Engine B5204T5, B5244T4, B5254T2, B6294S2, B6294T only
- Volvo V50 (2004–2013)2005–2007Engine B5254T3 only
- Volvo V50 (2004–2013)2008–2012Engine B5254T7 only
- Volvo V70 (2000–2008)2005Engine B5204T5, B5244T4, B5244T5, B5254T2, B5254T4 only
- Volvo V70 (2000–2008)2006–2007Engine B5204T5, B5244T5, B5254T2, B5254T4 only
- Volvo V70 (2000–2008)2008Engine B5254T2 only
- Volvo V70 XC / XC70 (2001–2007)2005All engines except: D5244T
- Volvo V70 XC / XC70 (2001–2007)2006Engine B5244T4, B5254T2 only
- Volvo V70 XC / XC70 (2001–2007)2007Engine B5254T2 only
- Volvo XC90 (2003–)2005–2006Engine B5254T2, B6294T only
- Volvo XC90 (2003–)2007–2012Engine B5254T2 only
- Volvo XC90 (2003–)2013–2014Engine B5254T9 only
- Volvo XC90 (2003–)2015
What does this fault code mean?
The engine control module (ECM) compares the actual position of the intake camshaft with the position it has requested. If the camshaft does not reach the requested position within a set time, the code is set. The check takes place while the engine is running and camshaft control is active.
Possible causes
- Low oil pressure
- Poor engine oil quality or contamination in the oil
- Damaged or sticking camshaft reset valve
- A mechanical fault inside the VVT unit
What you can do
- 1Check the fuse that feeds the camshaft reset valve
- 2Check the oil level and oil condition, particularly for contamination
- 3With a diagnostic tool: compare the actual camshaft position with the requested position in live data while the engine speed is raised, and check that they agree
- 4Have a workshop check the oil pressure, remove and clean the reset valve, and check the oil passages in the cylinder head
- 5If none of this finds the cause, have a workshop replace the reset valve or check the VVT unit
Symptoms you may notice4
- The malfunction indicator lamp is lit or behaves abnormally
- The engine is hard to start or cranks slowly
- Poor performance and lack of power
- The engine hesitates, surges or runs unevenly
What the fault can affect1
- Camshaft control for the intake valves is switched off
General guidance for car owners. Diagnosis on the car can point to a different cause.