VOLVO
ECM-6140 - Camshaft control, exhaust. Slow
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
9 modelsC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Show models by year and engine (23)
- Volvo C30 (2007–2013)2007Engine B5254T3 only
- Volvo C30 (2007–2013)2008–2013Engine B5254T7 only
- Volvo C70 (2006–2013)2006–2007Engine B5254T3 only
- Volvo C70 (2006–2013)2008–2013Engine B5254T7 only
- Volvo S40 (2004–2013)2005–2007Engine B5254T3 only
- Volvo S40 (2004–2013)2008Engine B5254T3, B5254T7 only
- Volvo S40 (2004–2013)2009–2012Engine B5254T7 only
- Volvo S60 (2001–2009)2005–2006Engine B5204T5, B5244T4, B5244T5, B5254T2, B5254T4 only
- Volvo S60 (2001–2009)2007Engine B5204T5, B5244T5, B5254T2, B5254T4 only
- Volvo S60 (2001–2009)2008–2009Engine B5204T5, B5244T5, B5254T2 only
- Volvo S80 (1999–2006)2005–2006Engine B5204T5, B5244T4, B5254T2, B6294S2, B6294T only
- Volvo V50 (2004–2013)2005–2007Engine B5254T3 only
- Volvo V50 (2004–2013)2008–2012Engine B5254T7 only
- Volvo V70 (2000–2008)2005Engine B5204T5, B5244T4, B5244T5, B5254T2, B5254T4 only
- Volvo V70 (2000–2008)2006–2007Engine B5204T5, B5244T5, B5254T2, B5254T4 only
- Volvo V70 (2000–2008)2008Engine B5254T2 only
- Volvo V70 XC / XC70 (2001–2007)2005All engines except: D5244T
- Volvo V70 XC / XC70 (2001–2007)2006Engine B5244T4, B5254T2 only
- Volvo V70 XC / XC70 (2001–2007)2007Engine B5254T2 only
- Volvo XC90 (2003–)2005–2006Engine B5254T2, B6294T only
- Volvo XC90 (2003–)2007–2012Engine B5254T2 only
- Volvo XC90 (2003–)2013–2014Engine B5254T9 only
- Volvo XC90 (2003–)2015
What does this fault code mean?
Exhaust camshaft control is too slow: the engine control module requests a position, and if the exhaust camshaft has not reached it within a set time, the fault is registered. The check takes place while the engine is running and camshaft control is active.
Possible causes
- Low oil pressure
- Poor engine oil quality or contamination in the oil
- Damaged or sticking reset valve for the exhaust camshaft
- Mechanical fault inside the VVT unit
What you can do
- 1Check the fuse that feeds the camshaft reset valve
- 2Check the oil level and oil condition, particularly for contamination
- 3With a diagnostic tool: compare the actual and requested exhaust camshaft positions in live data as the engine speed rises
- 4Have a workshop measure the oil pressure, clean the reset valve and check the oil passages in the cylinder head
- 5If none of this finds the cause, have a workshop replace the reset valve or check the VVT unit
Symptoms you may notice4
- The check engine lamp lights up or behaves abnormally
- The engine is slow to start or cranks slowly
- The engine performs poorly and lacks power
- The engine hesitates, surges or runs unevenly
What the fault can affect1
- Camshaft control for the exhaust valves is switched off
General guidance for car owners. Diagnosis on the car can point to a different cause.