VOLVO
ECM-614B - Camshaft control, exhaust. Faulty
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
9 modelsC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Show models by year and engine (23)
- Volvo C30 (2007–2013)2007Engine B5254T3 only
- Volvo C30 (2007–2013)2008–2013Engine B5254T7 only
- Volvo C70 (2006–2013)2006–2007Engine B5254T3 only
- Volvo C70 (2006–2013)2008–2013Engine B5254T7 only
- Volvo S40 (2004–2013)2005–2007Engine B5254T3 only
- Volvo S40 (2004–2013)2008Engine B5254T3, B5254T7 only
- Volvo S40 (2004–2013)2009–2012Engine B5254T7 only
- Volvo S60 (2001–2009)2005–2006Engine B5204T5, B5244T4, B5244T5, B5254T2, B5254T4 only
- Volvo S60 (2001–2009)2007Engine B5204T5, B5244T5, B5254T2, B5254T4 only
- Volvo S60 (2001–2009)2008–2009Engine B5204T5, B5244T5, B5254T2 only
- Volvo S80 (1999–2006)2005–2006Engine B5204T5, B5244T4, B5254T2, B6294S2, B6294T only
- Volvo V50 (2004–2013)2005–2007Engine B5254T3 only
- Volvo V50 (2004–2013)2008–2012Engine B5254T7 only
- Volvo V70 (2000–2008)2005Engine B5204T5, B5244T4, B5244T5, B5254T2, B5254T4 only
- Volvo V70 (2000–2008)2006–2007Engine B5204T5, B5244T5, B5254T2, B5254T4 only
- Volvo V70 (2000–2008)2008Engine B5254T2 only
- Volvo V70 XC / XC70 (2001–2007)2005All engines except: D5244T
- Volvo V70 XC / XC70 (2001–2007)2006Engine B5244T4, B5254T2 only
- Volvo V70 XC / XC70 (2001–2007)2007Engine B5254T2 only
- Volvo XC90 (2003–)2005–2006Engine B5254T2, B6294T only
- Volvo XC90 (2003–)2007–2012Engine B5254T2 only
- Volvo XC90 (2003–)2013–2014Engine B5254T9 only
- Volvo XC90 (2003–)2015
What does this fault code mean?
The engine control module (ECM) has found that the actual position of the exhaust camshaft does not match the position it has requested. The code is set when the requested position is not reached.
Possible causes
- Low oil pressure
- Engine oil of poor quality
- Exhaust camshaft reset valve damaged or sticking
- Internal fault in the VVT unit
What you can do
- 1Check the fuse that feeds the reset valve, especially if the engine will not start
- 2Look at the engine oil: level, colour and any contamination
- 3With a diagnostic tool: see in live data whether the exhaust camshaft reaches the requested position as the engine speed rises
- 4Have a workshop check the oil pressure and clean the reset valve, and see whether the oil passages in the cylinder head are blocked
- 5If the fault remains after this, have a workshop check the VVT unit
Symptoms you may notice4
- Malfunction indicator lamp lit
- The engine is hard to start or cranks slowly
- The engine feels weaker and lacks power
- The engine hesitates or surges
What the fault can affect1
- Camshaft control for the exhaust valves is switched off
General guidance for car owners. Diagnosis on the car can point to a different cause.