VOLVO
ECM-616B - Camshaft reset valve, exhaust. Signal missing
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
9 modelsC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Show models by year and engine (19)
- Volvo C30 (2007–2013)2007Engine B5254T3 only
- Volvo C30 (2007–2013)2008–2013Engine B5254T7 only
- Volvo C70 (2006–2013)2006–2007Engine B5254T3 only
- Volvo C70 (2006–2013)2008–2013Engine B5254T7 only
- Volvo S40 (2004–2013)2005–2007Engine B5254T3 only
- Volvo S40 (2004–2013)2008Engine B5254T3, B5254T7 only
- Volvo S40 (2004–2013)2009–2012Engine B5254T7 only
- Volvo S60 (2001–2009)2005–2006Engine B5204T5, B5244T4, B5244T5, B5254T2, B5254T4 only
- Volvo S80 (1999–2006)2005–2006Engine B5204T5, B5244T4, B5254T2, B6294S2, B6294T only
- Volvo V50 (2004–2013)2005–2007Engine B5254T3 only
- Volvo V50 (2004–2013)2008–2012Engine B5254T7 only
- Volvo V70 (2000–2008)2005Engine B5204T5, B5244T4, B5244T5, B5254T2, B5254T4 only
- Volvo V70 (2000–2008)2006Engine B5204T5, B5244T5, B5254T2, B5254T4 only
- Volvo V70 XC / XC70 (2001–2007)2005All engines except: D5244T
- Volvo V70 XC / XC70 (2001–2007)2006Engine B5244T4, B5254T2 only
- Volvo XC90 (2003–)2005–2006Engine B5254T2, B6294T only
- Volvo XC90 (2003–)2007–2012Engine B5254T2 only
- Volvo XC90 (2003–)2013–2014Engine B5254T9 only
- Volvo XC90 (2003–)2015
What does this fault code mean?
The engine control module (ECM) has detected a break in the signal cable to the reset valve for the exhaust camshaft, and the code is set. The valve controls the position of the exhaust camshaft.
Possible causes
- Open circuit in the signal cable
- Open circuit in the power cable
- Damaged exhaust camshaft reset valve
What you can do
- 1Check the fuse for the circuit to the reset valve
- 2If the fuse is blown, use a multimeter to check that the circuit is not short-circuited to ground
- 3Check that the connector at the valve is firmly seated and free from contact resistance and oxidation
- 4After any work, run the engine for a while and see whether the code comes back
- 5If you find no fault, have a workshop with diagnostic equipment check the valve and the cable to it
Symptoms you may notice1
- Malfunction indicator lamp lit
General guidance for car owners. Diagnosis on the car can point to a different cause.