VOLVO
ECM-616D - Camshaft reset valve, exhaust. Signal too low
System
Engine Control Module (ECM)
Volvo models this fault code applies to
This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.
Applies to the following models:
5 modelsS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Show models by year and engine (14)
- Volvo S60 (2001–2009)2005–2006Engine B5204T5, B5244T4, B5244T5, B5254T2, B5254T4 only
- Volvo S60 (2001–2009)2007Engine B5204T5, B5244T5, B5254T2, B5254T4 only
- Volvo S60 (2001–2009)2008–2009Engine B5204T5, B5244T5, B5254T2 only
- Volvo S80 (1999–2006)2005–2006Engine B5204T5, B5244T4, B5254T2, B6294S2, B6294T only
- Volvo V70 (2000–2008)2005Engine B5204T5, B5244T4, B5244T5, B5254T2, B5254T4 only
- Volvo V70 (2000–2008)2006–2007Engine B5204T5, B5244T5, B5254T2, B5254T4 only
- Volvo V70 (2000–2008)2008Engine B5254T2 only
- Volvo V70 XC / XC70 (2001–2007)2005All engines except: D5244T
- Volvo V70 XC / XC70 (2001–2007)2006Engine B5244T4, B5254T2 only
- Volvo V70 XC / XC70 (2001–2007)2007Engine B5254T2 only
- Volvo XC90 (2003–)2005–2006Engine B5254T2, B6294T only
- Volvo XC90 (2003–)2007–2012Engine B5254T2 only
- Volvo XC90 (2003–)2013–2014Engine B5254T9 only
- Volvo XC90 (2003–)2015
What does this fault code mean?
The engine control module (ECM) has registered too low a signal from the signal cable to the reset valve for the exhaust camshaft, and the code is set. The cause may be poor contact in the connections or the signal cable being short-circuited to ground.
Possible causes
- Contact resistance in the connections
- Signal cable short-circuited to ground
- Damaged exhaust camshaft reset valve
What you can do
- 1Start with the fuse for the circuit to the valve
- 2Use a multimeter to check that the cable to the valve is not short-circuited to ground
- 3Check the connectors at the valve for contact resistance and oxidation
- 4Clear the code and see whether it returns while the engine runs
- 5If you find no fault, have a workshop with diagnostic equipment check the reset valve
Symptoms you may notice1
- Malfunction indicator lamp lit
General guidance for car owners. Diagnosis on the car can point to a different cause.