VOLVO
ECM-6200 - Alternator. Signal missing
System
Engine Control Module (ECM)
Volvo models this fault code applies to
This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.
Applies to the following models:
8 modelsC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Show models by year and engine (20)
- Volvo C30 (2007–2013)2007Engine D5244T8, D5244T9 only
- Volvo C30 (2007–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo C70 (2006–2013)2007Engine D5244T8, D5244T9 only
- Volvo C70 (2006–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo S40 (2004–2013)2006Engine D5244T8 only
- Volvo S40 (2004–2013)2007Engine D5244T8, D5244T9 only
- Volvo S40 (2004–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo S60 (2001–2009)2006Engine D5244T4, D5244T5, D5244T6, D5244T7 only
- Volvo S60 (2001–2009)2007–2009Engine D5244T4, D5244T5, D5244T7 only
- Volvo V50 (2004–2013)2006Engine D5244T8 only
- Volvo V50 (2004–2013)2007Engine D5244T8, D5244T9 only
- Volvo V50 (2004–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo V70 (2000–2008)2006Engine D5244T4, D5244T5, D5244T6, D5244T7 only
- Volvo V70 (2000–2008)2007Engine D5244T4, D5244T5, D5244T7 only
- Volvo V70 (2000–2008)2008Engine D5244T5, D5244T7 only
- Volvo V70 XC / XC70 (2001–2007)2006–2007Engine D5244T4 only
- Volvo XC90 (2003–)2006–2007Engine D5244T4 only
- Volvo XC90 (2003–)2008–2010Engine D5244T4, D5244T5 only
- Volvo XC90 (2003–)2011Engine D5244T18, D5244T4, D5244T5 only
- Volvo XC90 (2003–)2012All engines except: B5254T2, B6324S5
What does this fault code mean?
The engine control module (ECM) and the alternator control module (ACM) communicate with each other over a signal cable. The code is set when the ECM receives word of an alternator fault or when communication between the modules breaks down. The battery can then discharge, because the alternator is not charging properly.
Possible causes
- Open circuit in the link between the two control modules
- Contact resistance or oxidation in the connectors
- Worn carbon brushes in the alternator
- Damaged alternator control module (ACM)
- Damaged auxiliary drive belt or belt tensioner
- An alternator not built for LIN communication has been fitted
What you can do
- 1If the alternator has recently been replaced, check that it is intended for this car and for communication with the control modules
- 2Check that the alternator drive belt is correctly fitted, not worn, and that the belt tensioner works
- 3Check that the connector to the alternator control module is firmly seated and free from contact resistance and oxidation
- 4Use a multimeter to check the signal cable for breaks and for short circuits to ground or voltage
- 5With a diagnostic tool: start the engine and read the alternator charging current in live data
Symptoms you may notice3
- Message in the information display
- The battery discharges
- The alternator warning lamp is lit with the engine running
General guidance for car owners. Diagnosis on the car can point to a different cause.