VOLVO
ECM-630B - A/C relay. Signal missing. Permanent fault
System
Engine Control Module (ECM)
Volvo models this fault code applies to
This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.
Applies to the following models:
5 modelsS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Show models by year and engine (14)
- Volvo S60 (2001–2009)2005–2006Engine B5204T5, B5244T4, B5244T5, B5254T2, B5254T4 only
- Volvo S60 (2001–2009)2007Engine B5204T5, B5244T5, B5254T2, B5254T4 only
- Volvo S60 (2001–2009)2008–2009Engine B5204T5, B5244T5, B5254T2 only
- Volvo S80 (1999–2006)2005–2006Engine B5204T5, B5244T4, B5254T2, B6294S2, B6294T only
- Volvo V70 (2000–2008)2005Engine B5204T5, B5244T4, B5244T5, B5254T2, B5254T4 only
- Volvo V70 (2000–2008)2006–2007Engine B5204T5, B5244T5, B5254T2, B5254T4 only
- Volvo V70 (2000–2008)2008Engine B5254T2 only
- Volvo V70 XC / XC70 (2001–2007)2005All engines except: D5244T
- Volvo V70 XC / XC70 (2001–2007)2006Engine B5244T4, B5254T2 only
- Volvo V70 XC / XC70 (2001–2007)2007Engine B5254T2 only
- Volvo XC90 (2003–)2005–2006Engine B5254T2, B6294T only
- Volvo XC90 (2003–)2007–2012Engine B5254T2 only
- Volvo XC90 (2003–)2013–2014Engine B5254T9 only
- Volvo XC90 (2003–)2015
What does this fault code mean?
The fault is present now: the engine control module (ECM) has registered a break in the signal cable to the A/C relay, and the fault remains until it has been put right. The A/C system does not work.
Possible causes
- Open circuit in the signal cable
- Loose or oxidised connector at the A/C relay
- Open circuit in the power cable
- Damaged A/C relay
What you can do
- 1Check that the connector at the A/C relay is firmly seated and free from contact resistance and oxidation
- 2Switch off the ignition, then refit the connector firmly with clean contacts
- 3With a diagnostic tool: switch the ignition on, activate the A/C relay and listen for a click. A click points to poor contact in the connector
- 4If the connector is fine, check the cables to the relay for breaks
- 5If the fault remains, have a workshop check the relay and the supply cable
Symptoms you may notice1
- The A/C system does not work
General guidance for car owners. Diagnosis on the car can point to a different cause.