VOLVO
ECM-660D - Malfunction indicator lamp (MIL). Signal too low
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
5 modelsS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Show models by year and engine (14)
- Volvo S60 (2001–2009)2005–2006Engine B5204T5, B5244T4, B5244T5, B5254T2, B5254T4 only
- Volvo S60 (2001–2009)2007Engine B5204T5, B5244T5, B5254T2, B5254T4 only
- Volvo S60 (2001–2009)2008–2009Engine B5204T5, B5244T5, B5254T2 only
- Volvo S80 (1999–2006)2005–2006Engine B5204T5, B5244T4, B5254T2, B6294S2, B6294T only
- Volvo V70 (2000–2008)2005Engine B5204T5, B5244T4, B5244T5, B5254T2, B5254T4 only
- Volvo V70 (2000–2008)2006–2007Engine B5204T5, B5244T5, B5254T2, B5254T4 only
- Volvo V70 (2000–2008)2008Engine B5254T2 only
- Volvo V70 XC / XC70 (2001–2007)2005All engines except: D5244T
- Volvo V70 XC / XC70 (2001–2007)2006Engine B5244T4, B5254T2 only
- Volvo V70 XC / XC70 (2001–2007)2007Engine B5254T2 only
- Volvo XC90 (2003–)2005–2006Engine B5254T2, B6294T only
- Volvo XC90 (2003–)2007–2012Engine B5254T2 only
- Volvo XC90 (2003–)2013–2014Engine B5254T9 only
- Volvo XC90 (2003–)2015
What does this fault code mean?
Although the fault code is named signal too low, it applies to a short to ground in the lamp wiring. The engine control module treats this as a fault and stores the fault code.
Possible causes
- Signal wire shorted to ground
What you can do
- 1Use a multimeter to check that the signal wire to the malfunction indicator lamp is not shorted to ground
- 2Look for chafed spots on the wire to the instrument panel, where the cable may have touched the bodywork
- 3Check the connectors in the instrument panel and repair any damage
- 4Repair or replace the damaged wire and clear the fault code afterwards
Symptoms you may notice1
- The malfunction indicator lamp is lit
General guidance for car owners. Diagnosis on the car can point to a different cause.