VOLVO
ECM-6810 - Turbo control actuator. Signal too high
System
Engine Control Module (ECM)
Volvo models this fault code applies to
This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.
Applies to the following models:
8 modelsC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Show models by year and engine (20)
- Volvo C30 (2007–2013)2007Engine D5244T8, D5244T9 only
- Volvo C30 (2007–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo C70 (2006–2013)2007Engine D5244T8, D5244T9 only
- Volvo C70 (2006–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo S40 (2004–2013)2006Engine D5244T8 only
- Volvo S40 (2004–2013)2007Engine D5244T8, D5244T9 only
- Volvo S40 (2004–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo S60 (2001–2009)2006Engine D5244T4, D5244T5, D5244T6, D5244T7 only
- Volvo S60 (2001–2009)2007–2009Engine D5244T4, D5244T5, D5244T7 only
- Volvo V50 (2004–2013)2006Engine D5244T8 only
- Volvo V50 (2004–2013)2007Engine D5244T8, D5244T9 only
- Volvo V50 (2004–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo V70 (2000–2008)2006Engine D5244T4, D5244T5, D5244T6, D5244T7 only
- Volvo V70 (2000–2008)2007Engine D5244T4, D5244T5, D5244T7 only
- Volvo V70 (2000–2008)2008Engine D5244T5, D5244T7 only
- Volvo V70 XC / XC70 (2001–2007)2006–2007Engine D5244T4 only
- Volvo XC90 (2003–)2006–2007Engine D5244T4 only
- Volvo XC90 (2003–)2008–2010Engine D5244T4, D5244T5 only
- Volvo XC90 (2003–)2011Engine D5244T18, D5244T4, D5244T5 only
- Volvo XC90 (2003–)2012All engines except: B5254T2, B6324S5
What does this fault code mean?
The ECM drives the turbo control motor with a pulse-width modulated signal. If the module registers that the signal to the motor is too high, the code is set. The fault is checked when the engine is shut off, and it may be a short to supply voltage in the signal wire or a damaged turbo control motor.
Possible causes
- Signal wire shorted to supply voltage
- Open circuit in the ground lead
- Damaged turbo control motor
What you can do
- 1Read the code, clear it and road test the car; the code is checked when the engine is shut off, so see whether it returns
- 2Check the connector to the turbo control motor and the wiring for chafing, loose connections and oxidation
- 3With the ignition off and the connector disconnected, use a multimeter to check that the signal wire has no voltage to ground (body)
- 4Check that the ground lead to the turbo control motor is intact and has good contact
- 5With diagnostic equipment, activate the turbo control motor and check that it moves
- 6If the wiring is intact but the fault remains, have a workshop check the turbo control motor
Symptoms you may notice1
- Poor performance
What the fault can affect1
- Engine torque is limited
General guidance for car owners. Diagnosis on the car can point to a different cause.