VOLVO
ECM-683D - Turbo control actuator. Faulty signal
System
Engine Control Module (ECM)
Volvo models this fault code applies to
This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.
Applies to the following models:
8 modelsC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Show models by year and engine (20)
- Volvo C30 (2007–2013)2007Engine D5244T8, D5244T9 only
- Volvo C30 (2007–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo C70 (2006–2013)2007Engine D5244T8, D5244T9 only
- Volvo C70 (2006–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo S40 (2004–2013)2006Engine D5244T8 only
- Volvo S40 (2004–2013)2007Engine D5244T8, D5244T9 only
- Volvo S40 (2004–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo S60 (2001–2009)2006Engine D5244T4, D5244T5, D5244T6, D5244T7 only
- Volvo S60 (2001–2009)2007–2009Engine D5244T4, D5244T5, D5244T7 only
- Volvo V50 (2004–2013)2006Engine D5244T8 only
- Volvo V50 (2004–2013)2007Engine D5244T8, D5244T9 only
- Volvo V50 (2004–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo V70 (2000–2008)2006Engine D5244T4, D5244T5, D5244T6, D5244T7 only
- Volvo V70 (2000–2008)2007Engine D5244T4, D5244T5, D5244T7 only
- Volvo V70 (2000–2008)2008Engine D5244T5, D5244T7 only
- Volvo V70 XC / XC70 (2001–2007)2006–2007Engine D5244T4 only
- Volvo XC90 (2003–)2006–2007Engine D5244T4 only
- Volvo XC90 (2003–)2008–2010Engine D5244T4, D5244T5 only
- Volvo XC90 (2003–)2011Engine D5244T18, D5244T4, D5244T5 only
- Volvo XC90 (2003–)2012Engine D5244T18, D5244T5 only
What does this fault code mean?
The ECM drives the turbo control motor with a pulse-width modulated signal and watches the circuit. The code is set when an open circuit is registered in the circuit to the motor, and also when the temperature in the output stage that drives the motor becomes too high.
Possible causes
- Loose connection, contact resistance or oxidation in the terminals
- Open circuit in the power supply
- Open circuit in the signal wire
- Open circuit in the ground lead
- Damaged turbo control motor
- The turbo control motor binds or has seized
What you can do
- 1Read the code, clear it and road test the car to see whether it returns
- 2With the ignition off, check that the moving parts of the turbo control motor move freely and have not jammed
- 3Check the connector to the turbo control motor for loose contact, contact resistance and oxidation
- 4With diagnostic equipment and the ignition on, command the motor and listen for a ticking sound
- 5Use a multimeter to check that the supply, signal and ground wires are intact
- 6If the wiring is intact but the fault remains, have a workshop check the turbo control motor
Symptoms you may notice2
- Poor performance
- Malfunction indicator lamp (MIL) on
General guidance for car owners. Diagnosis on the car can point to a different cause.