VOLVO
ECM-6840 - Turbo control. Faulty signal
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
8 modelsC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Show models by year and engine (20)
- Volvo C30 (2007–2013)2007Engine D5244T8, D5244T9 only
- Volvo C30 (2007–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo C70 (2006–2013)2007Engine D5244T8, D5244T9 only
- Volvo C70 (2006–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo S40 (2004–2013)2006Engine D5244T8 only
- Volvo S40 (2004–2013)2007Engine D5244T8, D5244T9 only
- Volvo S40 (2004–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo S60 (2001–2009)2006Engine D5244T4, D5244T5, D5244T6, D5244T7 only
- Volvo S60 (2001–2009)2007–2009Engine D5244T4, D5244T5, D5244T7 only
- Volvo V50 (2004–2013)2006Engine D5244T8 only
- Volvo V50 (2004–2013)2007Engine D5244T8, D5244T9 only
- Volvo V50 (2004–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo V70 (2000–2008)2006Engine D5244T4, D5244T5, D5244T6, D5244T7 only
- Volvo V70 (2000–2008)2007Engine D5244T4, D5244T5, D5244T7 only
- Volvo V70 (2000–2008)2008Engine D5244T5, D5244T7 only
- Volvo V70 XC / XC70 (2001–2007)2006–2007Engine D5244T4 only
- Volvo XC90 (2003–)2006–2007Engine D5244T4 only
- Volvo XC90 (2003–)2008–2010Engine D5244T4, D5244T5 only
- Volvo XC90 (2003–)2011Engine D5244T18, D5244T4, D5244T5 only
- Volvo XC90 (2003–)2012All engines except: B5254T2, B6324S5
What does this fault code mean?
The ECM drives the turbo control motor with a pulse-width modulated signal. If the module finds a problem with the signal feeding the turbo control system, the code is set, and it is checked with the engine running. The fault may be due to poor contact at the connections, an open circuit in the signal or supply wire, a damaged turbo control motor or an internal fault in the control module.
Possible causes
- Contact resistance or oxidation in the connectors
- Open circuit in the signal wire
- Open circuit in the power supply
- Damaged turbo control motor
- Internal fault inside the ECM itself
What you can do
- 1Read the code, clear it and road test the car with the engine running to see whether it returns
- 2Check the connections for contact resistance, loose contact and oxidation
- 3With the ignition off and the connector disconnected, use a multimeter to check that the supply and signal wires are intact
- 4Check that the fuses for the turbocharger control system are intact
- 5If the wiring is intact but the fault remains, have a workshop check the turbo control motor and the engine control module
Symptoms you may notice2
- Message in the information display
- Poor performance
General guidance for car owners. Diagnosis on the car can point to a different cause.