VOLVO
ECM-6B00 - Malfunction indicator lamp (MIL) signal. Signal too high. Permanent fault
System
Engine Control Module (ECM)
Volvo models this fault code applies to
This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.
Applies to the following models:
5 modelsS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Show models by year and engine (16)
- Volvo S60 (2001–2009)2001All engines except: B5244S, B5244S2, D5244T
- Volvo S60 (2001–2009)2002Engine B5204T5, B5234T3, B5234T7, B5244T3 only
- Volvo S60 (2001–2009)2003Engine B5204T5, B5234T3, B5234T7, B5244T3, B5254T2 only
- Volvo S60 (2001–2009)2004Engine B5204T5, B5234T3, B5234T7, B5254T2, B5254T4 only
- Volvo S80 (1999–2006)1999–2000All engines except: B5244S, B5244S2, D5252T MSA 15.8
- Volvo S80 (1999–2006)2001Engine B5204T5, B5234T7, B5244T3, B6284T, B6294S only
- Volvo S80 (1999–2006)2002Engine B5204T5, B5234T7, B5244T3, B6294S2, B6294T only
- Volvo S80 (1999–2006)2003Engine B5204T5, B5234T7, B5244T3, B5254T2, B6294S2, B6294T only
- Volvo S80 (1999–2006)2004Engine B5204T5, B5234T7, B5254T2, B6294S2, B6294T only
- Volvo V70 (2000–2008)2000All engines except: D5252T MSA 15.8
- Volvo V70 (2000–2008)2001–2002Engine B5204T5, B5234T3, B5234T7, B5244T3 only
- Volvo V70 (2000–2008)2003Engine B5204T5, B5234T3, B5234T7, B5244T3, B5254T2 only
- Volvo V70 (2000–2008)2004Engine B5204T5, B5234T3, B5234T7, B5254T2, B5254T4 only
- Volvo V70 XC / XC70 (2001–2007)2001–2002
- Volvo V70 XC / XC70 (2001–2007)2003–2004All engines except: D5244T
- Volvo XC90 (2003–)2003–2004All engines except: D5244T
What does this fault code mean?
The fault is permanent, so it is present now. The engine control module (ECM) treats a malfunction indicator lamp (MIL) circuit that is shorted or broken as a fault and sets the code. This variant is caused by an open circuit in the ground lead, which makes the signal too high.
Possible causes
- Open circuit in the ground lead
What you can do
- 1Check that the MIL lights briefly when the ignition is switched on, and note whether it stays lit
- 2With the ignition off and the connector disconnected, use a multimeter to check that the ground lead to the MIL is intact and has contact with the body
- 3Check the earth point and the connectors on the ground lead for oxidation, loose connections and damage
- 4Read the code, clear it and road test the car; if it returns and the ground lead is intact, have a workshop check the control module
Symptoms you may notice1
- Malfunction indicator lamp (MIL) lit
General guidance for car owners. Diagnosis on the car can point to a different cause.