VOLVO
ECM-910D - Clutch pedal sensor. Signal too low
System
Engine Control Module (ECM)
Volvo models this fault code applies to
This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.
Applies to the following models:
8 modelsC70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Show models by year and engine (17)
- Volvo C70 (2006–2013)2006Engine B5254T3 only
- Volvo S40 (2004–2013)2005–2006Engine B5254T3 only
- Volvo S60 (2001–2009)2005–2006Engine B5204T5, B5244T4, B5244T5, B5254T2, B5254T4 only
- Volvo S60 (2001–2009)2007Engine B5204T5, B5244T5, B5254T2, B5254T4 only
- Volvo S60 (2001–2009)2008–2009Engine B5204T5, B5244T5, B5254T2 only
- Volvo S80 (1999–2006)2005–2006Engine B5204T5, B5244T4, B5254T2, B6294S2, B6294T only
- Volvo V50 (2004–2013)2005–2006Engine B5254T3 only
- Volvo V70 (2000–2008)2005Engine B5204T5, B5244T4, B5244T5, B5254T2, B5254T4 only
- Volvo V70 (2000–2008)2006–2007Engine B5204T5, B5244T5, B5254T2, B5254T4 only
- Volvo V70 (2000–2008)2008Engine B5254T2 only
- Volvo V70 XC / XC70 (2001–2007)2005All engines except: D5244T
- Volvo V70 XC / XC70 (2001–2007)2006Engine B5244T4, B5254T2 only
- Volvo V70 XC / XC70 (2001–2007)2007Engine B5254T2 only
- Volvo XC90 (2003–)2005–2006Engine B5254T2, B6294T only
- Volvo XC90 (2003–)2007–2012Engine B5254T2 only
- Volvo XC90 (2003–)2013–2014Engine B5254T9 only
- Volvo XC90 (2003–)2015
What does this fault code mean?
The ECM finds a signal from the clutch pedal sensor that is too low, or receives an error message over CAN from the central electronic module (CEM) that points to it. Fault finding is done in the CEM first, since this code cannot be cleared until the fault there has been fixed and erased.
Possible causes
- The signal wire is shorted to ground
- A damaged clutch pedal sensor
- The fault lies in the central electronic module (CEM)
What you can do
- 1Read the codes in the central electronic module (CEM) first, and trace and fix them
- 2Clear this code only after the code in the CEM has been fixed and erased
- 3If you have diagnostic equipment, read the clutch pedal movement in live data while slowly pressing and releasing the pedal; the value should change with the pedal movement
- 4Use a multimeter to check that the clutch pedal sensor signal wire is not shorted to ground (the body), and check the connectors for oxidation
- 5If the fault remains, have a workshop check the clutch pedal sensor
Symptoms you may notice1
- Cruise control does not work at all
What the fault can affect1
- Cruise control is switched off
General guidance for car owners. Diagnosis on the car can point to a different cause.