VOLVO
ECM-91E0 - Throttle valve. Too high supply voltage
System
Engine Control Module (ECM)
Volvo models this fault code applies to
This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.
Applies to the following models:
9 modelsC70 Cabriolet (1998–2005), C70 Coupé (1998–2002), S60 (2001–2009), S70 (1997–2000), S80 (1999–2006), V70 (1997–2000), V70 (2000–2008), V70 XC (1998–2000), V70 XC / XC70 (2001–2007)
Show models by year and engine (22)
- Volvo C70 Cabriolet (1998–2005)1999–2002
- Volvo C70 Coupé (1998–2002)1999–2002
- Volvo S60 (2001–2009)2001All engines except: D5244T
- Volvo S60 (2001–2009)2002Engine B5244S, B5244S2, B5244SG, B5244SG2 only
- Volvo S60 (2001–2009)2003–2005Engine B5244SG, B5244SG2 only
- Volvo S60 (2001–2009)2006–2008Engine B5244SG only
- Volvo S70 (1997–2000)1999Engine B5204T3, B5204T4, B5234T3, B5234T7, B5254S DENSO, B5254T only
- Volvo S70 (1997–2000)2000All engines except: D5252T MSA 15.8
- Volvo S80 (1999–2006)1999–2000All engines except: D5252T MSA 15.8
- Volvo S80 (1999–2006)2001All engines except: D5244T, D5252T MSA 15.8
- Volvo S80 (1999–2006)2002Engine B5244S, B5244S2, B5244SG, B5244SG2 only
- Volvo S80 (1999–2006)2003–2005Engine B5244SG, B5244SG2 only
- Volvo S80 (1999–2006)2006Engine B5244SG only
- Volvo V70 (1997–2000)1999Engine B5204T3, B5204T4, B5234T3, B5234T7, B5234T8, B5254S DENSO, B5254T only
- Volvo V70 (1997–2000)2000All engines except: D5252T MSA 15.8
- Volvo V70 (2000–2008)2000All engines except: D5252T MSA 15.8
- Volvo V70 (2000–2008)2001All engines except: D5244T, D5252T MSA 15.8
- Volvo V70 (2000–2008)2002Engine B5244S, B5244S2, B5244SG, B5244SG2 only
- Volvo V70 (2000–2008)2003–2005Engine B5244SG, B5244SG2 only
- Volvo V70 (2000–2008)2006–2008Engine B5244SG only
- Volvo V70 XC (1998–2000)1999–2000
- Volvo V70 XC / XC70 (2001–2007)2001
What does this fault code mean?
The throttle unit (ETM) has registered that the battery voltage was too low. Although the code is named too high supply voltage, it refers to low voltage at the throttle unit. The cause can be an inadequate supply, poor connections, or a charging system that does not work correctly.
Possible causes
- Inadequate power supply to the throttle unit
- Loose plugs, or contact resistance in the plug connections
- Poorly charged battery or corroded battery cables
- Defective generator or charge regulator
What you can do
- 1Read the frozen values to see when it happened and whether the engine ran. If only the throttle unit saw low voltage, look for a fault in its supply.
- 2Check that the connectors to the throttle unit are firmly seated and that it has power and earth connections
- 3Check the battery charge and the battery cable connections for corrosion and contact resistance
- 4If voltage was too low or high in both the ECM and the throttle unit while the engine ran, the generator or regulator may be damaged. Have a workshop check it.
- 5Erase the codes and reset: ignition off for three minutes, on and off again, then three more. Add two minutes if the cooling fan has been running.
Symptoms you may notice1
- No noticeable symptoms for the driver
General guidance for car owners. Diagnosis on the car can point to a different cause.