VOLVO
ECM-92E0 - Engine control module (ECM). Internal fault
System
Engine Control Module (ECM)
Volvo models this fault code applies to
This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.
Applies to the following models:
5 modelsS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Show models by year and engine (14)
- Volvo S60 (2001–2009)2005–2006Engine B5204T5, B5244T4, B5244T5, B5254T2, B5254T4 only
- Volvo S60 (2001–2009)2007Engine B5204T5, B5244T5, B5254T2, B5254T4 only
- Volvo S60 (2001–2009)2008–2009Engine B5204T5, B5244T5, B5254T2 only
- Volvo S80 (1999–2006)2005–2006Engine B5204T5, B5244T4, B5254T2, B6294S2, B6294T only
- Volvo V70 (2000–2008)2005Engine B5204T5, B5244T4, B5244T5, B5254T2, B5254T4 only
- Volvo V70 (2000–2008)2006–2007Engine B5204T5, B5244T5, B5254T2, B5254T4 only
- Volvo V70 (2000–2008)2008Engine B5254T2 only
- Volvo V70 XC / XC70 (2001–2007)2005All engines except: D5244T
- Volvo V70 XC / XC70 (2001–2007)2006Engine B5244T4, B5254T2 only
- Volvo V70 XC / XC70 (2001–2007)2007Engine B5254T2 only
- Volvo XC90 (2003–)2005–2006Engine B5254T2, B6294T only
- Volvo XC90 (2003–)2007–2012Engine B5254T2 only
- Volvo XC90 (2003–)2013–2014Engine B5254T9 only
- Volvo XC90 (2003–)2015
What does this fault code mean?
The ECM has detected an internal fault in its built-in amplifier for the signal from potentiometer 1 of the throttle position sensor. It is found when the ECM tries to adapt the throttle unit, and the cause is a damaged ECM.
Possible causes
- Damaged engine control module (ECM)
What you can do
- 1Read the fault codes and deal with any that are stored. The code concerns the ECM's own amplifier, so the ECM is the part under suspicion
- 2Check that the connectors at the ECM and the throttle unit are secure and free from corrosion
- 3If the code comes back after this, the ECM is damaged and needs replacing. This is a workshop job, as the new unit must be programmed
Symptoms you may notice1
- No noticeable symptoms for the driver
What the fault can affect1
- The signal from potentiometer 1 (circuit 1) of the throttle position sensor is ignored by the ECM
General guidance for car owners. Diagnosis on the car can point to a different cause.