VOLVO
ECM-9300 - Clutch pedal sensor. Signal too low
System
Engine Control Module (ECM)
Volvo models this fault code applies to
This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.
Applies to the following models:
13 modelsC30 (2007–2013), C70 (2006–2013), C70 Cabriolet (1998–2005), C70 Coupé (1998–2002), S40 (2004–2013), S60 (2001–2009), S70 (1997–2000), S80 (1999–2006), V50 (2004–2013), V70 (1997–2000), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Show models by year and engine (39)
- Volvo C30 (2007–2013)2007Engine D5244T8, D5244T9 only
- Volvo C30 (2007–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo C70 (2006–2013)2007Engine D5244T8, D5244T9 only
- Volvo C70 (2006–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo C70 Cabriolet (1998–2005)2000Engine B5244S only
- Volvo C70 Coupé (1998–2002)1999Engine B5254S DENSO only
- Volvo C70 Coupé (1998–2002)2000Engine B5244S only
- Volvo S40 (2004–2013)2006Engine D5244T8 only
- Volvo S40 (2004–2013)2007Engine D5244T8, D5244T9 only
- Volvo S40 (2004–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo S60 (2001–2009)2001Engine B5244S, B5244S2 only
- Volvo S60 (2001–2009)2002Engine B5244S, B5244S2, B5244SG, B5244SG2 only
- Volvo S60 (2001–2009)2003–2005Engine B5244SG, B5244SG2 only
- Volvo S60 (2001–2009)2006Engine B5244SG, D5244T4, D5244T5, D5244T6, D5244T7 only
- Volvo S60 (2001–2009)2007–2008Engine B5244SG, D5244T4, D5244T5, D5244T7 only
- Volvo S60 (2001–2009)2009Engine D5244T4, D5244T5, D5244T7 only
- Volvo S70 (1997–2000)1999Engine B5254S DENSO only
- Volvo S70 (1997–2000)2000Engine B5244S, B5244S2, B5244SG, B5244SG2 only
- Volvo S80 (1999–2006)1999–2000Engine B5244S, B5244S2 only
- Volvo S80 (1999–2006)2001Engine B5244S, B5244S2, B5244SG only
- Volvo S80 (1999–2006)2002Engine B5244S, B5244S2, B5244SG, B5244SG2 only
- Volvo S80 (1999–2006)2003–2005Engine B5244SG, B5244SG2 only
- Volvo S80 (1999–2006)2006Engine B5244SG only
- Volvo V50 (2004–2013)2006Engine D5244T8 only
- Volvo V50 (2004–2013)2007Engine D5244T8, D5244T9 only
- Volvo V50 (2004–2013)2008–2010Engine D5244T13, D5244T8, D5244T9 only
- Volvo V70 (1997–2000)1999Engine B5254S DENSO only
- Volvo V70 (1997–2000)2000Engine B5244S, B5244S2, B5244SG, B5244SG2 only
- Volvo V70 (2000–2008)2001Engine B5244S, B5244S2, B5244SG only
- Volvo V70 (2000–2008)2002Engine B5244S, B5244S2, B5244SG, B5244SG2 only
- Volvo V70 (2000–2008)2003–2005Engine B5244SG, B5244SG2 only
- Volvo V70 (2000–2008)2006Engine B5244SG, D5244T4, D5244T5, D5244T6, D5244T7 only
- Volvo V70 (2000–2008)2007Engine B5244SG, D5244T4, D5244T5, D5244T7 only
- Volvo V70 (2000–2008)2008Engine B5244SG, D5244T5, D5244T7 only
- Volvo V70 XC / XC70 (2001–2007)2006–2007Engine D5244T4 only
- Volvo XC90 (2003–)2006–2007Engine D5244T4 only
- Volvo XC90 (2003–)2008–2010Engine D5244T4, D5244T5 only
- Volvo XC90 (2003–)2011Engine D5244T18, D5244T4, D5244T5 only
- Volvo XC90 (2003–)2012All engines except: B5254T2, B6324S5
What does this fault code mean?
The code concerns a clutch pedal sensor signal that is too low. The ECM receives information from the sensor and sets the code when it detects a fault in that signal. The fault may lie in the sensor, the wiring or the connectors, and the cruise control is switched off.
Possible causes
- Signal cable short-circuited to ground
- Contact resistance or oxidation in the connectors
- Damaged pedal position sensor
What you can do
- 1Read the fault status with a diagnostic tool. It shows whether the fault is permanent or intermittent, and whether other codes are also stored
- 2If the status is wrong, make sure the clutch pedal sensor is properly fitted and adjusted
- 3With the ignition off: disconnect the connector at the ECM and use a multimeter to check that the signal cable has no contact with ground (body)
- 4Check the battery condition and charge
- 5If you have a diagnostic tool: check in live data that the clutch pedal sensor signal follows the pedal. A value that stays low points to a fault
- 6If upgraded software from 2006 or later exists for the car, it may be the solution. A workshop can load it
Symptoms you may notice4
- ETS warning lamp lights
- Cruise control does not function at all
- Switch to gas drive is not possible
- Message in the information display
What the fault can affect1
- Cruise control is off for the driving cycle in which the fault was detected
General guidance for car owners. Diagnosis on the car can point to a different cause.