VOLVO
ECM-9990 - Engine control module (ECM). Faulty signal
System
Engine Control Module (ECM)
Volvo models this fault code applies to
This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.
Applies to the following models:
5 modelsS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Show models by year and engine (14)
- Volvo S60 (2001–2009)2005–2006Engine B5204T5, B5244T4, B5244T5, B5254T2, B5254T4 only
- Volvo S60 (2001–2009)2007Engine B5204T5, B5244T5, B5254T2, B5254T4 only
- Volvo S60 (2001–2009)2008–2009Engine B5204T5, B5244T5, B5254T2 only
- Volvo S80 (1999–2006)2005–2006Engine B5204T5, B5244T4, B5254T2, B6294S2, B6294T only
- Volvo V70 (2000–2008)2005Engine B5204T5, B5244T4, B5244T5, B5254T2, B5254T4 only
- Volvo V70 (2000–2008)2006–2007Engine B5204T5, B5244T5, B5254T2, B5254T4 only
- Volvo V70 (2000–2008)2008Engine B5254T2 only
- Volvo V70 XC / XC70 (2001–2007)2005All engines except: D5244T
- Volvo V70 XC / XC70 (2001–2007)2006Engine B5244T4, B5254T2 only
- Volvo V70 XC / XC70 (2001–2007)2007Engine B5254T2 only
- Volvo XC90 (2003–)2005–2006Engine B5254T2, B6294T only
- Volvo XC90 (2003–)2007–2012Engine B5254T2 only
- Volvo XC90 (2003–)2013–2014Engine B5254T9 only
- Volvo XC90 (2003–)2015
What does this fault code mean?
The engine control module continuously checks its internal restart function. The code is set when a fault is found in that function, and the fault then lies in the module itself rather than in a sensor or wiring. During the restart the engine may stall or fail to start.
Possible causes
- Faulty software in the engine control module
- Damaged engine control module (ECM)
What you can do
- 1Read the code, clear it and start the engine to see whether it returns
- 2If it returns, have a workshop try downloading new software into the module; this needs the right equipment
- 3If new software does not solve the problem, the module must be replaced, and the new one also needs the correct software; a workshop should do this
Symptoms you may notice4
- Malfunction indicator lamp (MIL) is on
- Malfunction indicator lamp (MIL) flashes
- The engine stalls
- The starter motor turns without the engine starting
What the fault can affect1
- The engine control module tries to restart itself
General guidance for car owners. Diagnosis on the car can point to a different cause.