VOLVO
ECM-A12B - Speed signal. Signal missing
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
9 modelsC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Show models by year and engine (23)
- Volvo C30 (2007–2013)2007Engine B5254T3 only
- Volvo C30 (2007–2013)2008–2013Engine B5254T7 only
- Volvo C70 (2006–2013)2006–2007Engine B5254T3 only
- Volvo C70 (2006–2013)2008–2013Engine B5254T7 only
- Volvo S40 (2004–2013)2005–2007Engine B5254T3 only
- Volvo S40 (2004–2013)2008Engine B5254T3, B5254T7 only
- Volvo S40 (2004–2013)2009–2012Engine B5254T7 only
- Volvo S60 (2001–2009)2005–2006Engine B5204T5, B5244T4, B5244T5, B5254T2, B5254T4 only
- Volvo S60 (2001–2009)2007Engine B5204T5, B5244T5, B5254T2, B5254T4 only
- Volvo S60 (2001–2009)2008–2009Engine B5204T5, B5244T5, B5254T2 only
- Volvo S80 (1999–2006)2005–2006Engine B5204T5, B5244T4, B5254T2, B6294S2, B6294T only
- Volvo V50 (2004–2013)2005–2007Engine B5254T3 only
- Volvo V50 (2004–2013)2008–2012Engine B5254T7 only
- Volvo V70 (2000–2008)2005Engine B5204T5, B5244T4, B5244T5, B5254T2, B5254T4 only
- Volvo V70 (2000–2008)2006–2007Engine B5204T5, B5244T5, B5254T2, B5254T4 only
- Volvo V70 (2000–2008)2008Engine B5254T2 only
- Volvo V70 XC / XC70 (2001–2007)2005All engines except: D5244T
- Volvo V70 XC / XC70 (2001–2007)2006Engine B5244T4, B5254T2 only
- Volvo V70 XC / XC70 (2001–2007)2007Engine B5254T2 only
- Volvo XC90 (2003–)2005–2006Engine B5254T2, B6294T only
- Volvo XC90 (2003–)2007–2012Engine B5254T2 only
- Volvo XC90 (2003–)2013–2014Engine B5254T9 only
- Volvo XC90 (2003–)2015
What does this fault code mean?
The brake control module (BCM) has detected a fault on the speed signal and sends a fault message to the engine control module, which then sets the code. The fault may lie in the CAN communication, in a signal wire that is short-circuited, or in one of the modules. The code therefore indicates that the fault most likely sits in a module other than the engine control module.
Possible causes
- Contact resistance in the CAN terminals
- Open circuit in one or both CAN wires
- One or both signal wires short-circuited to ground, supply voltage or each other
- Damaged brake control module (BCM)
- Damaged engine control module (ECM)
What you can do
- 1The code indicates that the fault most likely lies in another module, so fault-trace from the module that sends the signal, which is the brake control module (BCM)
- 2Read the fault codes in the brake control module and deal with them first; this code cannot be cleared until the root fault is remedied and its code cleared
- 3Check the CAN network connectors and wires for open circuits, short circuits and chafing
- 4The brake control module is safety-critical, so do not work on it yourself; have a workshop check it
Symptoms you may notice1
- Malfunction indicator lamp (MIL) is on
What the fault can affect1
- The brake control module's speed signal is replaced by a fixed value
General guidance for car owners. Diagnosis on the car can point to a different cause.