What does fault code ECM-B10A200 mean?

Diagnostic fault code details for ECM-B10A200 (Volvo S60 (2011–), Volvo S60 (2011–), Volvo S60 (2011–)). Repair service at OBD Tuning.

VOLVO

ECM-B10A200 - Crash Input. General Failure Information. No sub type information

System

Engine Control Module (ECM)

Volvo models this fault code applies to

Applies to the following models:

7 models

S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)

Show models by year and engine (22)

What does this fault code mean?

The engine control module records internally whether the car has been in a crash. The code is set when the CEM reports internally that a collision has taken place, and when the engine control module detects a fault in the airbag signal. Engine start is then not permitted, and the code must be cleared like a normal fault code.

Possible causes

The airbag has deployed
A fault in the central electronic module (CEM)
A fault in the supplemental restraint system (SRS)

What you can do

1Read the fault codes in the central electronic module (CEM) first and then in the supplemental restraint system (SRS)
2The code can be cleared only once the root fault has been remedied and its code erased
3The airbag and the restraint system are safety-critical; do not work on them yourself and have a workshop check them

Symptoms you may notice5

The starter motor turns but the engine does not start
General warning lamp on
Message in the display
The check engine lamp lights or behaves abnormally
Text window with a warning symbol and text message

What the fault can affect1

Engine start is not permitted

General guidance for car owners. Diagnosis on the car can point to a different cause.