VOLVO
ECM-B10FF68 - Ignition control. Algorithm Based Failures. Event information
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
10 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Show models by year and engine (27)
- Volvo S60 (2011–)2011–2012Engine B6304T4 only
- Volvo S60 (2011–)2013–2014Engine B5204T8, B5204T9, B5254T12, B5254T14, B6304T4 only
- Volvo S60 (2011–)2015Engine B5204T8, B5204T9, B5254T12, B5254T14, B6304T3, B6304T4, B6304T5 only
- Volvo S80 (2007–)2007Engine B6324S, B8444S only
- Volvo S80 (2007–)2008–2009Engine B6304T2, B6324S, B8444S only
- Volvo S80 (2007–)2010Engine B6324S2 only
- Volvo S80 (2007–)2011–2015Engine B6324S4 only
- Volvo V40 (2013–)2013–2014Engine B5204T8, B5204T9, B5254T12, B5254T14 only
- Volvo V40 (2013–)2015Engine B5204T8, B5204T9 only
- Volvo V40 Cross Country (2013–)2013–2015Engine B5204T8, B5204T9, B5254T12, B5254T14 only
- Volvo V60 (2011–)2011–2012Engine B6304T4 only
- Volvo V60 (2011–)2013Engine B5204T8, B5204T9, B6304T4 only
- Volvo V60 (2011–)2014Engine B5204T8, B5204T9, B5254T12, B6304T4 only
- Volvo V60 (2011–)2015Engine B5204T9, B5254T12, B6304T3, B6304T4, B6304T5 only
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2009Engine B6304T2, B6324S only
- Volvo V70 (2008–)2010Engine B6324S2 only
- Volvo XC60 (2009–)2009Engine B6304T2 only
- Volvo XC60 (2009–)2010Engine B6304T2, B6324S2 only
- Volvo XC60 (2009–)2011–2014Engine B6304T4, B6324S4 only
- Volvo XC60 (2009–)2015Engine B5204T9, B5254T12, B5254T14, B6304T4, B6324S4 only
- Volvo XC70 (2008–)2008Engine B6324S only
- Volvo XC70 (2008–)2009Engine B6304T2, B6324S only
- Volvo XC70 (2008–)2010Engine B6324S2 only
- Volvo XC70 (2008–)2011–2015Engine B6324S4 only
- Volvo XC90 (2003–)2007–2010Engine B6324S only
- Volvo XC90 (2003–)2011–2014Engine B6324S5 only
What does this fault code mean?
The engine control module monitors the engine's ignition. This is an event-controlled information code, set when the ignition stays outside its limits for a certain time while the engine runs. It does not point to a fault in the module, and it does not indicate a fault that must be repaired.
Possible causes
- The code does not come from any fault that requires repair
What you can do
- 1Do not fault-trace the code by itself; it is an information code showing that the ignition has been outside its limits for a while
- 2If the car jerks or hesitates, read the fault codes in the engine control module and deal with the other codes first
- 3Clear the code once any other faults are remedied, then road test the car to see whether it returns
Symptoms you may notice5
- Jerky running
- Message in the display
- Poor performance and lack of power, especially when starting
- Hesitation and surging during acceleration, deceleration and at steady speed
- Text window with a warning symbol and text message
What the fault can affect1
- Fuel supply is cut off while the fault is active
General guidance for car owners. Diagnosis on the car can point to a different cause.