VOLVO
ECM-C200387 - Steering wheel switch left module. Bus Signal / Message Failures. Missing message
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
10 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Show models by year and engine (25)
- Volvo S60 (2011–)2011–2012Engine B6304T4 only
- Volvo S60 (2011–)2013–2014Engine B5204T8, B5204T9, B5254T12, B5254T14, B6304T4 only
- Volvo S60 (2011–)2015Engine B5204T8, B5204T9, B5254T12, B5254T14, B6304T3, B6304T4, B6304T5 only
- Volvo S80 (2007–)2010Engine B6304T2, B6324S, B6324S2, B8444S only
- Volvo S80 (2007–)2011Engine B6304T4, B6324S4, B6324S5, B8444S only
- Volvo S80 (2007–)2012, 2015Engine B6304T4, B6324S4, B6324S5 only
- Volvo S80 (2007–)2013–2014Engine B5254T12, B5254T14, B6304T4, B6324S4, B6324S5 only
- Volvo V40 (2013–)2013–2014Engine B5204T8, B5204T9, B5254T12, B5254T14 only
- Volvo V40 (2013–)2015Engine B5204T8, B5204T9 only
- Volvo V40 Cross Country (2013–)2013–2015Engine B5204T8, B5204T9, B5254T12, B5254T14 only
- Volvo V60 (2011–)2011–2012Engine B6304T4 only
- Volvo V60 (2011–)2013Engine B5204T8, B5204T9, B6304T4 only
- Volvo V60 (2011–)2014Engine B5204T8, B5204T9, B5254T12, B6304T4 only
- Volvo V60 (2011–)2015Engine B5204T9, B5254T12, B6304T3, B6304T4, B6304T5 only
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2010Engine B6304T2, B6324S, B6324S2 only
- Volvo V70 (2008–)2011–2012Engine B6304T4, B6324S5 only
- Volvo V70 (2008–)2013–2014Engine B5204T9, B6304T4, B6324S5 only
- Volvo V70 (2008–)2015Engine B5204T9, B6304T4 only
- Volvo XC60 (2009–)2010Engine B6304T2, B6324S, B6324S2 only
- Volvo XC60 (2009–)2011–2014Engine B6304T4, B6324S4, B6324S5 only
- Volvo XC60 (2009–)2015Engine B5204T9, B5254T12, B5254T14, B6304T4, B6324S4, B6324S5 only
- Volvo XC70 (2008–)2010Engine B6304T2, B6324S, B6324S2 only
- Volvo XC70 (2008–)2011–2015Engine B6304T4, B6324S4, B6324S5 only
- Volvo XC90 (2003–)2011–2014Engine B6324S5 only
What does this fault code mean?
The control module for the steering wheel buttons receives continuous information about the cruise control buttons from the central electronic module (CEM) over CAN. The fault code is set when the message from the CEM stops, and the cruise control then does not work.
Possible causes
- Open circuit in the communication cable
- Communication cable short-circuited to ground
- Communication cable short-circuited to supply voltage
- Contact resistance or oxidation in the connections
- Open circuit in the connections
- Short circuit in the connections
What you can do
- 1Read out the fault codes in the CEM and in the steering wheel button module, and fix the CAN codes first
- 2Check that the fuses are intact and that the battery has a good charge
- 3Check the connectors at the CEM for loose contacts and corrosion, and look for chafing on the communication cable along the wiring harness
- 4If the battery has been disconnected or the engine control module has been reprogrammed: press the brake pedal twice for about two seconds to activate the cruise control
- 5If the fault is in the wiring at the steering wheel, have a workshop check it
- 6Erase the fault code once the others are fixed, then road test with the cruise control to see whether it returns
Symptoms you may notice2
- The cruise control does not work at all
- The cruise control does not engage
What the fault can affect1
- The cruise control is disengaged for as long as the fault is active
General guidance for car owners. Diagnosis on the car can point to a different cause.