VOLVO
ECM-P001692 - Crankshaft Position - Camshaft Position Correlation - Bank 1 Sensor A. Component Failures. Performance or incorrect operation
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
10 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Show models by year and engine (32)
- Volvo S60 (2011–)2011–2012Engine B6304T4 only
- Volvo S60 (2011–)2013Engine B5204T8, B5204T9, B5254T12, B5254T14, B6304T4 only
- Volvo S60 (2011–)2014Engine B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, B5204T8, B5204T9, B5254T12, B5254T14, B6304T4 only
- Volvo S60 (2011–)2015All engines except: B4164T, B4164T2, B4164T3, D4162T, D4204T5, D5204T3, D5204T7, D5244T11, D5244T15, D5244T23
- Volvo S80 (2007–)2010Engine B6304T2, B6324S, B6324S2, B8444S only
- Volvo S80 (2007–)2011Engine B6304T4, B6324S4, B6324S5, B8444S only
- Volvo S80 (2007–)2012Engine B6304T4, B6324S4, B6324S5 only
- Volvo S80 (2007–)2013Engine B5254T12, B5254T14, B6304T4, B6324S4, B6324S5 only
- Volvo S80 (2007–)2014Engine B4204T11, B4204T12, B4204T15, B5254T12, B5254T14, B6304T4, B6324S4, B6324S5 only
- Volvo S80 (2007–)2015All engines except: B4164T, D4162T, D4204T5, D5204T3, D5244T15
- Volvo V40 (2013–)2013–2014Engine B5204T8, B5204T9, B5254T12, B5254T14 only
- Volvo V40 (2013–)2015Engine B4204T11, B5204T8, B5204T9 only
- Volvo V40 Cross Country (2013–)2013–2014Engine B5204T8, B5204T9, B5254T12, B5254T14 only
- Volvo V40 Cross Country (2013–)2015All engines except: B4164T, D4162T, D4204T14, D5204T6
- Volvo V60 (2011–)2011–2012Engine B6304T4 only
- Volvo V60 (2011–)2013Engine B5204T8, B5204T9, B6304T4 only
- Volvo V60 (2011–)2014Engine B4204T11, B4204T12, B4204T15, B4204T9, B5204T8, B5204T9, B5254T12, B6304T4 only
- Volvo V60 (2011–)2015Engine B4204T11, B4204T12, B4204T15, B4204T9, B5204T9, B5254T12, B6304T3, B6304T4, B6304T5 only
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2010Engine B6304T2, B6324S, B6324S2 only
- Volvo V70 (2008–)2011–2012Engine B6304T4, B6324S5 only
- Volvo V70 (2008–)2013Engine B5204T9, B6304T4, B6324S5 only
- Volvo V70 (2008–)2014Engine B4204T11, B5204T9, B6304T4, B6324S5 only
- Volvo V70 (2008–)2015Engine B4204T11, B5204T9, B6304T4 only
- Volvo XC60 (2009–)2010Engine B6304T2, B6324S, B6324S2 only
- Volvo XC60 (2009–)2011–2013Engine B6304T4, B6324S4, B6324S5 only
- Volvo XC60 (2009–)2014Engine B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, B6304T4, B6324S4, B6324S5 only
- Volvo XC60 (2009–)2015All engines except: B4204T7, D4204T5, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
- Volvo XC70 (2008–)2010Engine B6304T2, B6324S, B6324S2 only
- Volvo XC70 (2008–)2011–2013Engine B6304T4, B6324S4, B6324S5 only
- Volvo XC70 (2008–)2014–2015Engine B4204T11, B6304T4, B6324S4, B6324S5 only
- Volvo XC90 (2003–)2011–2014Engine B6324S5 only
What does this fault code mean?
The engine control module adjusts the camshaft adaptation when the camshaft does not agree with the crankshaft, and the code is set when the adaptation changes by more than the equivalent of one tooth. It concerns bank 1, sensor A, which is the intake camshaft. It is tested when the engine is warm or being started.
Possible causes
- Incorrectly set camshafts
- Damaged VVT unit
- Camshaft drive has skipped one or more teeth
What you can do
- 1Read the code, clear it and road test the car to see whether it returns
- 2If you have a diagnostic tool: compare the intake camshaft timing angle with the target value in live data with the engine running
- 3Check the engine oil level and quality, and that it is free from contamination
- 4Have a workshop check the camshaft basic setting and that the camshaft drive has not skipped teeth
- 5Have a workshop remove the control valve for cleaning, or try a new one if the fault remains
- 6If the fault returns: have a workshop check the VVT unit
Symptoms you may notice5
- The car lacks power, especially when pulling away from standstill
- Engine does not start, the starter motor cranks it
- Engine is hard to start
- Uneven idle
- Engine hesitates or runs jerkily on acceleration and at steady speed
What the fault can affect1
- The control module uses a fixed value for the camshaft adaptation
General guidance for car owners. Diagnosis on the car can point to a different cause.