VOLVO
ECM-P001694 - Crankshaft Position - Camshaft Position Correlation - Bank 1 Sensor A. Component Failures. Unexpected operation
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
7 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Show models by year and engine (20)
- Volvo S60 (2011–)2011Engine B4164T, B4164T3, B4204T6, B4204T7 only
- Volvo S60 (2011–)2012–2014Engine B4164T, B4164T2, B4164T3, B4204T7 only
- Volvo S60 (2011–)2015Engine B4164T, B4164T2, B4164T3 only
- Volvo S80 (2007–)2010Engine B4204T6 only
- Volvo S80 (2007–)2011Engine B4164T, B4204T6, B4204T7 only
- Volvo S80 (2007–)2012–2014Engine B4164T, B4164T2, B4204T6, B4204T7 only
- Volvo S80 (2007–)2015Engine B4164T only
- Volvo V40 (2013–)2013Engine B4164T, B4164T3 only
- Volvo V40 (2013–)2014–2015Engine B4164T, B4164T3, B4164T4 only
- Volvo V40 Cross Country (2013–)2013–2015Engine B4164T only
- Volvo V60 (2011–)2011Engine B4164T, B4164T3, B4204T6, B4204T7 only
- Volvo V60 (2011–)2012–2014Engine B4164T, B4164T2, B4164T3, B4204T7 only
- Volvo V60 (2011–)2015Engine B4164T, B4164T2, B4164T3 only
- Volvo V70 (2008–)2010Engine B4204T6 only
- Volvo V70 (2008–)2011Engine B4164T, B4204T6, B4204T7 only
- Volvo V70 (2008–)2012–2014Engine B4164T, B4164T2, B4204T7 only
- Volvo V70 (2008–)2015Engine B4164T, B4164T2 only
- Volvo XC60 (2009–)2010Engine B4204T6 only
- Volvo XC60 (2009–)2011–2012Engine B4204T6, B4204T7 only
- Volvo XC60 (2009–)2013–2015Engine B4204T7 only
What does this fault code mean?
The engine control module checks the camshaft position against the crankshaft position. If the exhaust camshaft is out of position and sits too far ahead of the crankshaft, the control module adjusts the position, and the code is set when the adaptation value rises above a certain value.
Possible causes
- Poor quality engine oil
- Incorrectly set camshafts
- Camshaft timing belt has skipped teeth
- Faulty camshaft control valve
- Mechanical fault in the VVT unit
What you can do
- 1Read the code, clear it and road test the car to see whether it returns
- 2Check the engine oil level and quality, and that it is free from contamination
- 3If you have a diagnostic tool: activate exhaust camshaft control and check that it responds
- 4Have a workshop check the camshaft basic setting and the timing belt
- 5Have a workshop clean the control valve, or replace it if cleaning does not help
- 6If the fault returns: have a workshop check the VVT unit
Symptoms you may notice1
- Check engine lamp lit or behaving abnormally
General guidance for car owners. Diagnosis on the car can point to a different cause.