Skip to content
    OBD Tuning
    Send to us
    Send to us
    Home
    Fault Codes
    VOLVO
    ECM-P002777
    VOLVO

    ECM-P002777 - Exhaust Valve Control Solenoid Circuit Range/Performance (Bank 1). Mechanical Failures. Commanded position not reachable

    System

    Engine Control Module (ECM)

    Volvo models this fault code applies to

    Applies to the following models:

    3 models

    S60 (2011–), S80 (2007–), V70 (2008–)

    Show models by year and engine (9)
    • Volvo S60 (2011–)2011–2012Engine B5254T5 only
    • Volvo S80 (2007–)2007–2008Engine B5254T6 only
    • Volvo S80 (2007–)2009Engine B5254T6, B5254T8 only
    • Volvo S80 (2007–)2010–2011Engine B5254T10, B5254T11, B5254T8 only
    • Volvo S80 (2007–)2012Engine B5254T10 only
    • Volvo V70 (2008–)2008Engine B5254T6 only
    • Volvo V70 (2008–)2009Engine B5254T6, B5254T8 only
    • Volvo V70 (2008–)2010–2011Engine B5254T10, B5254T11 only
    • Volvo V70 (2008–)2012Engine B5254T10 only

    What does this fault code mean?

    The engine control module monitors the exhaust camshaft position and has found that it does not match the commanded position, so the camshaft cannot reach it. The code concerns the control solenoid for the exhaust valve on bank 1. It is a mechanical fault, and camshaft control is switched off.

    Possible causes

    • Low engine oil pressure
    • Poor quality engine oil
    • Sticking exhaust camshaft control valve
    • Mechanical fault in the VVT unit

    What you can do

    1. 1Check the fuse for the supply voltage to the exhaust camshaft control valve
    2. 2Check the engine oil level and quality, especially that it is not contaminated
    3. 3Have a workshop measure the oil pressure
    4. 4If you have a diagnostic tool: activate exhaust camshaft control and see whether it responds
    5. 5If the fault remains: have a workshop clean the control valve and check the oil passages in the cylinder head
    6. 6If the fault returns after this: have a workshop replace the control valve and check the VVT unit

    Symptoms you may notice4

    • Check engine lamp lit or behaving abnormally
    • Engine is hard to start and cranks slowly
    • The car lacks power
    • Engine hesitates or runs jerkily on acceleration and at steady speed

    What the fault can affect1

    • Camshaft control is switched off

    General guidance for car owners. Diagnosis on the car can point to a different cause.

    OBD Tuning

    Sweden's leading expert center for automotive electronics. We offer professional ECU tuning, control unit repair and diagnostics with 12-month warranty.

    Services

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    Database & Diagnostics

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    ECU Manufacturers

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Company

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    Visit us

    Gjuterigatan 29, Karlstad

    Call us

    054-830 480

    Email us

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. All rights reserved.