VOLVO
ECM-P003100 - HO2S Heater Control Circuit Low (Bank 1, Sensor 1). General Failure Information. No sub type information
System
Engine Control Module (ECM)
Volvo models this fault code applies to
Applies to the following models:
14 modelsC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Show models by year and engine (38)
- Volvo C30 (2007–2013)2011–2013Engine D5204T, D5204T5 only
- Volvo C70 (2006–2013)2011Engine D5204T, D5204T5 only
- Volvo C70 (2006–2013)2012–2013All engines except: B5254T7
- Volvo S40 (2004–2013)2011–2012Engine D5204T, D5204T5 only
- Volvo S60 (2011–)2011Engine B5254T5, B6304T4, D5204T2, D5244T10 only
- Volvo S60 (2011–)2012Engine B5254T5, B6304T4, D5204T3, D5244T11, D5244T15 only
- Volvo S60 (2011–)2013–2014All engines except: B4164T, B4164T2, B4164T3, B4204T7, D4162T
- Volvo S60 (2011–)2015All engines except: B4164T, B4164T2, B4164T3, D4162T
- Volvo S80 (2007–)2007
- Volvo S80 (2007–)2008–2009All engines except: B4204S3, B4204S4, D4204T
- Volvo S80 (2007–)2010All engines except: B4204S3, B4204S4, B4204T6, D4164T, D4204T
- Volvo S80 (2007–)2011All engines except: B4164T, B4204S3, B4204S4, B4204T6, B4204T7, D4164T
- Volvo S80 (2007–)2012–2014All engines except: B4164T, B4164T2, B4204T6, B4204T7, D4162T
- Volvo S80 (2007–)2015All engines except: B4164T, D4162T
- Volvo V40 (2013–)2013All engines except: B4164T, B4164T3, D4162T
- Volvo V40 (2013–)2014–2015All engines except: B4164T, B4164T3, B4164T4, D4162T
- Volvo V40 Cross Country (2013–)2013–2015All engines except: B4164T, D4162T
- Volvo V50 (2004–2013)2011–2012Engine D5204T, D5204T5 only
- Volvo V60 (2011–)2011Engine B6304T4, D5204T2, D5244T10 only
- Volvo V60 (2011–)2012Engine B6304T4, D5204T3, D5244T11, D5244T15 only
- Volvo V60 (2011–)2013–2014All engines except: B4164T, B4164T2, B4164T3, B4204T7, D4162T
- Volvo V60 (2011–)2015All engines except: B4164T, B4164T2, B4164T3, D4162T
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2009All engines except: B4204S3, B4204S4, D4204T
- Volvo V70 (2008–)2010All engines except: B4204S3, B4204S4, B4204T6, D4164T, D4204T
- Volvo V70 (2008–)2011Engine B5254T10, B5254T11, B6304T4, B6324S5, D5204T2, D5244T10 only
- Volvo V70 (2008–)2012–2014All engines except: B4164T, B4164T2, B4204T7, D4162T
- Volvo V70 (2008–)2015All engines except: B4164T, B4164T2, D4162T
- Volvo XC60 (2009–)2009
- Volvo XC60 (2009–)2010All engines except: B4204T6
- Volvo XC60 (2009–)2011–2012All engines except: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015All engines except: B4204T7
- Volvo XC70 (2008–)2008–2015
- Volvo XC90 (2003–)2005–2006Engine B8444S only
- Volvo XC90 (2003–)2007–2010Engine B6324S, B8444S only
- Volvo XC90 (2003–)2011Engine B6324S5, B8444S only
- Volvo XC90 (2003–)2012Engine B6324S5 only
- Volvo XC90 (2003–)2013–2014All engines except: B5254T9
What does this fault code mean?
The engine control module checks the heater circuit of the front lambda sensor on bank 1 and sets the code when the circuit is shorted to ground or has an open circuit. The code can also be set if the resistance of the sensor heating element is wrong. The lambda sensor provides information about the air-fuel mixture before the particulate filter.
Possible causes
- Blown fuse
- Open circuit in the supply wire
- Supply wire shorted to ground
- Poor contact or oxidation in the connections
- Faulty front lambda sensor
What you can do
- 1Read the code, clear it and road test the car to see whether it returns
- 2Check the fuse for the lambda sensor heater
- 3Check the connector at the front lambda sensor for loose or oxidised parts, and do not use rust-release spray or grease in the connector
- 4Use a multimeter to check that the supply wire to the sensor has no open circuit and no short to ground
- 5If you have a diagnostic tool: read the fault status once the diagnosis is complete, where Fault found means the fault is still present
- 6If the fault remains after troubleshooting: have a workshop try a new lambda sensor
Symptoms you may notice2
- Emissions warning lamp lit
- Check engine lamp lit or behaving abnormally
What the fault can affect2
- Lambda control is switched off
- Heating of the front lambda sensor is switched off
General guidance for car owners. Diagnosis on the car can point to a different cause.