Skip to content
    OBD Tuning
    Send to us
    Send to us
    Home
    Fault Codes
    VOLVO
    ECM-P005600
    VOLVO

    ECM-P005600 - HO2S Heater Control Circuit (Bank 2, Sensor 2). General Failure Information. No sub type information

    System

    Engine Control Module (ECM)

    Volvo models this fault code applies to

    Applies to the following models:

    5 models

    S80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)

    Show models by year and engine (12)
    • Volvo S80 (2007–)2010Engine B6324S, B8444S only
    • Volvo S80 (2007–)2011Engine B6324S5, B8444S only
    • Volvo S80 (2007–)2012–2015Engine B6324S5 only
    • Volvo V70 (2008–)2010Engine B6324S only
    • Volvo V70 (2008–)2011–2014Engine B6324S5 only
    • Volvo XC60 (2009–)2010Engine B6324S only
    • Volvo XC60 (2009–)2011–2015Engine B6324S5 only
    • Volvo XC70 (2008–)2010Engine B6324S only
    • Volvo XC70 (2008–)2011–2015Engine B6324S5 only
    • Volvo XC90 (2003–)2010Engine B8444S only
    • Volvo XC90 (2003–)2011Engine B6324S5, B8444S only
    • Volvo XC90 (2003–)2012–2014Engine B6324S5 only

    What does this fault code mean?

    Although the code is named as a heater control circuit, it concerns how quickly the rear oxygen sensor on bank 2, sensor 2, responds. The engine control module actively switches between rich and lean fuel and air mixture and compares how closely the sensor signal follows those switches. The sensor is judged too slow if it reacts too slowly when the mixture goes from rich to lean.

    Possible causes

    • Contact resistance or oxidation in the connectors
    • Damaged rear heated oxygen sensor

    What you can do

    1. 1Read the fault code with a diagnostic tool after a test drive and note whether it is active
    2. 2Make sure the fuses are intact. Their location is given in the instruction manual
    3. 3If you have a diagnostic tool, follow the rear oxygen sensor signal in live data during a test drive and see whether it switches between rich and lean without delay
    4. 4Look for contact resistance and oxidation in the connector to the rear oxygen sensor on bank 2 sensor 2
    5. 5If the connector is clean and intact but the signal is still slow, replace the rear oxygen sensor

    Symptoms you may notice1

    • The Check engine (malfunction indicator) lamp lights up or behaves abnormally

    General guidance for car owners. Diagnosis on the car can point to a different cause.

    OBD Tuning

    Sweden's leading expert center for automotive electronics. We offer professional ECU tuning, control unit repair and diagnostics with 12-month warranty.

    Services

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    Database & Diagnostics

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    ECU Manufacturers

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Company

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    Visit us

    Gjuterigatan 29, Karlstad

    Call us

    054-830 480

    Email us

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. All rights reserved.