Skip to content
    OBD Tuning
    Send to us
    Send to us
    Home
    Fault Codes
    VOLVO
    ECM-P005800
    VOLVO

    ECM-P005800 - HO2S Heater Control Circuit High (Bank 2, Sensor 2). General Failure Information. No sub type information

    System

    Engine Control Module (ECM)

    Volvo models this fault code applies to

    Applies to the following models:

    5 models

    S80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)

    Show models by year and engine (13)
    • Volvo S80 (2007–)2007–2010Engine B6324S, B8444S only
    • Volvo S80 (2007–)2011Engine B6324S5, B8444S only
    • Volvo S80 (2007–)2012–2015Engine B6324S5 only
    • Volvo V70 (2008–)2008–2010Engine B6324S only
    • Volvo V70 (2008–)2011–2014Engine B6324S5 only
    • Volvo XC60 (2009–)2010Engine B6324S only
    • Volvo XC60 (2009–)2011–2015Engine B6324S5 only
    • Volvo XC70 (2008–)2008–2010Engine B6324S only
    • Volvo XC70 (2008–)2011–2015Engine B6324S5 only
    • Volvo XC90 (2003–)2005–2006Engine B8444S only
    • Volvo XC90 (2003–)2007–2010Engine B6324S, B8444S only
    • Volvo XC90 (2003–)2011Engine B6324S5, B8444S only
    • Volvo XC90 (2003–)2012–2014Engine B6324S5 only

    What does this fault code mean?

    The code is set when the preheating circuit of the rear oxygen sensor on bank 2, sensor 2, is short-circuited to supply voltage. Preheating of the rear sensor is then switched off for as long as the fault remains.

    Possible causes

    • Power lead short-circuited to supply voltage
    • Damaged rear heated oxygen sensor

    What you can do

    1. 1Read the fault status with a diagnostic tool with the ignition on, once the diagnostic is complete. Fault found means the fault is present now
    2. 2Rust solvent spray or grease does not belong in the oxygen sensor connector
    3. 3Make sure the fuses are intact. Their location is on the fuse chart or in the instruction manual
    4. 4Look for chafing or pinch damage on the lead to the sensor, where it may have touched a live wire
    5. 5With a multimeter, check that the preheating lead is not short-circuited to supply voltage
    6. 6Replace the rear oxygen sensor if the fault remains after checking the wiring

    Symptoms you may notice1

    • The malfunction indicator lamp lights up

    What the fault can affect1

    • Preheating of the rear oxygen sensor is switched off

    General guidance for car owners. Diagnosis on the car can point to a different cause.

    OBD Tuning

    Sweden's leading expert center for automotive electronics. We offer professional ECU tuning, control unit repair and diagnostics with 12-month warranty.

    Services

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    Database & Diagnostics

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    ECU Manufacturers

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Company

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    • Engine Tuning
    • ECU Repair
    • Module Cloning
    • Instrument Cluster
    • SRS / Airbag
    • Immobilizer

    • ECU Database
    • DTC Fault Code Catalog
    • Diagnostic Guides & Live Data
    • AI Fault Code Analyzer
    • News

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • About us
    • Contact
    • Workshop Partners
    • Shipping Guide
    • Warranty
    • FAQ
    • Terms & Conditions
    • Privacy Policy
    • Site Map

    Visit us

    Gjuterigatan 29, Karlstad

    Call us

    054-830 480

    Email us

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. All rights reserved.